EPM240 Datasheet, PDF (85/86 Pages) Altera Corporation – JTAG & In-System Programmability

6. Reference and Ordering Information
MII51006-1.5
Software
MAX^® II devices are supported by the Altera^® Quartus^® II design software with new,
optional MAX+PLUS^® II look and feel, which provides HDL and schematic design
entry, compilation and logic synthesis, full simulation and advanced timing analysis,
and device programming. Refer to the Design Software Selector Guide for more
details about the Quartus II software features.
The Quartus II software supports the Windows XP/2000/NT, Sun Solaris, Linux Red
Hat v8.0, and HP-UX operating systems. It also supports seamless integration with
industry-leading EDA tools through the NativeLink^® interface.
Device Pin-Outs
Printed device pin-outs for MAX II devices are available on the Altera website
(www.altera.com).
Ordering Information
Figure 6–1 describes the ordering codes for MAX II devices. For more information
about a specific package, refer to the Package Information chapter in the MAX II Device
Handbook.
Figure 6–1. MAX II Device Packaging Ordering Information
EPM
240
G T 100
C
3
ES
Family Signature
EPM: MAX II
Device Type
240:
570:
1270:
2210:
240 Logic Elements
570 Logic Elements
1,270 Logic Elements
2,210 Logic Elements
Optional Suffix
Indicates specific device
options or shipment method
ES: Engineering sample
N: Lead-free packaging
Speed Grade
3, 4, 5, 6, or 7, with 3 being the fastest
Product-Line Suffix
Indicates device type
G:
Z:
Blank (no identifier):
1.8-V V_CCINT low-power device
1.8-V V_CCINT zero-power device
2.5-V or 3.3-V V_CCINT device
Package Type
T: Thin quad flat pack (TQFP)
F: FineLine BGA
M: Micro FineLine BGA
Operating Temperature
C: Commercial temperature (T_J = 0° C to 85° C)
I: Industrial temperature (T_J = -40° C to 100° C)
A: Automotive temperature (T_J = -40° C to 125° C)
Pin Count
Number of pins for a particular package
© October 2008 Altera Corporation
MAX II Device Handbook