English
Language : 

DS506 Datasheet, PDF (16/19 Pages) Xilinx, Inc – LogiCORE IP Endpoint v3.7
LogiCORE IP Endpoint v3.7 for PCI Express®
Table 9: Receive Transaction Interface Signals (Cont’d)
Name
Direction
Description
trn_rbar_hit_n[6:0]
Output
Receive BAR Hit: Indicates BAR(s) targeted by the current receive
transaction. Active low.
• trn_rbar_hit_n[0] => BAR0
• trn_rbar_hit_n[1] => BAR1
• trn_rbar_hit_n[2] => BAR2
• trn_rbar_hit_n[3] => BAR3
• trn_rbar_hit_n[4] => BAR4
• trn_rbar_hit_n[5] => BAR5
• trn_rbar_hit_n[6] => Expansion ROM Address
Note that, if two BARs are configured into a single 64-bit address, both
corresponding trn_rbar_hit_n bits will be asserted.
trn_rfc_ph_av[7:0](2)
Output
Receive Posted Header Flow Control Credits Available: The
number of Posted Header FC credits available to the remote link
partner.
trn_rfc_pd_av[11:0]2
Output
Receive Posted Data Flow Control Credits Available: The number
of Posted Data FC credits available to the remote link partner.
trn_rfc_nph_av[7:0]2
Output
Receive Non-Posted Header Flow Control Credits Available: The
number of Non-Posted Header FC credits available to the remote link
partner.
trn_rfc_npd_av[11:0]2
Output
Receive Non-Posted Data Flow Control Credits Available: The
number of Non-Posted Data FC credits available to the remote link
partner.
trn_rfc_cplh_av[7:0]2
Output
Receive Completion Header Flow Control Credits Available: The
number of Completion Header FC credits available to the remote link
partner.
Note that this value and trn_rfc_cpld_av[11:0] are hypothetical
quantities reflecting credit availability that would be advertised to the
remote link partner if the core were not required to advertise infinite
Completion credits.
trn_rfc_cpld_av[11:0]2
Output
Receive Completion Data Flow Control Credits Available: The
number of Completion Data FC credits available to the remote link
partner.
1. trn_rrem[7:0] is not supported or needed for the 1-lane and 4-lane 32-bit endpoint products.
2. Credit values given to the user are instantaneous quantities, not the cumulative (from time zero) values seen by the remote link partner.
16
www.xilinx.com
DS506 April 19, 2010
Product Specification