W681307 Datasheet, PDF (65/160 Pages) Winbond – USB1.1 CODEC Microprocessor Control Unit with 32KB Mask ROM and 4KB RAM

W681307
10.7.2.7
Address
0x1709h
TX delay3
Access Mode Value At Reset
R/W
0x00
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
TX delay3
Set the values for delaying the transmitted bits of PCM Highway B3 channel after the tail bit of TX PCM Highway B2 channel. The
resolution is one Bitclk in full date rate and two Bitclk in half data rate.
10.7.2.8
Address
0x170Ah
TX delay4
Access Mode
R/W
Value At Reset
0x00
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
TX delay4
Set the values for delaying the transmitted bits of PCM Highway B4 channel after the tail bit of TX PCM Highway B3 channel. The
resolution is one Bitclk in full date rate and two Bitclk in half data rate.
10.7.2.9
Address
0x170Bh
RX delay3
Access Mode
R/W
Value At Reset
0x00
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
RX delay3
Set the values for delaying the received bits of PCM Highway B3 channel after the tail bit of RX PCM Highway B2 channel. The
resolution is one Bitclk in full date rate and two Bitclk in half data rate.
10.7.2.10
Address
0x170Ch
Rx delay4
Access Mode
R/W
Value At Reset
0x00
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
RX delay4
Set the values for delaying the received bits of PCM Highway B4 channel after the tail bit of RX PCM Highway B3 channel. The
resolution is one Bitclk in full date rate and two Bitclk in half data rate.
- 65 -
Publication Release Date: May, 2007
Revision 1.3