GV7704 Datasheet, PDF (46/52 Pages) Semtech Corporation – Quad HD-VLC Receiver

Table 5-1: GV7704 Register Descriptions — Channel Controls (Continued)
Address
Register Name
Parameter Name
Bit
Slice
48ED_h (Ch 0)
54ED_h (Ch 1) _{ANC_PACKET_CS_9_8_ ANC_PACKET_CS_9_}
60ED_h (Ch 2)
REG
8
1:0
6CED_h (Ch 3)
48EE_h (Ch 0)
54EE_h (Ch 1) _{ANC_PACKET_CS_7_0_ ANC_PACKET_CS_7_}
60EE_h (Ch 2)
REG
0
7:0
6CEE_h (Ch 3)
48EF_h (Ch 0)
54EF_h (Ch 1) _{OUTPUT_BLOCK_CFG_}
60EF_h (Ch 2)
REG
BT656_ENABLE
0:0
6CEF_h (Ch 3)
48F4_h (Ch 0)
54F4_h (Ch 1)
60F4_h (Ch 2)
6CF4_h (Ch 3)
TX_WORD_CLK_
ENABLE_REG
TX_WORD_CLK_
ENABLE
0:0
492C_h (Ch 0)
552C_h (Ch 1) ^{PARALLEL_VIDEO_OUT PARALLEL_VIDEO_}
_DRV_STRENGTH_SEL_
OUT_DRV_
0:0
612C_h (Ch 2)
REG
STRENGTH_SEL
6D2C_h (Ch 3)
R/W
Reset
Value
Description
CS Word extracted from the
ancillary data packet.
Equal to the nine least significant
bits of the sum of the nine least
significant bits of the data
RO
0_{h identification (DID) word, the data}
block number (DBN)/ secondary
data identification word (SDID),
the data count (DC) word, and all
user data words (UDW) in the
packet. Bits [9:8]
RO
0_h
CS Word extracted from the
ancillary data packet. Bits [7:0]
1_b = Device generates the BT656
10-bit YCbCr multiplexed video
format
RW
0_b
0_b = Device generates the default
SMPTE 10-bit YCbCr multiplexed
video format
RW
0_b
Used in the procedure to enable
SDO. See Section 4.3.2.1 for details
Parallel video output (PCLK, HOUT,
VOUT, FOUT, DOUT[9:0]) drive
RW
0_b ^{strength select.}
1_b= high drive strength
0_b = low drive strength
GV7704
Preliminary Data Sheet Rev.3
PDS-060376
September 2015
www.semtech.com
46 of 52
Semtech