M3727GM6 Datasheet, PDF (96/129 Pages) Renesas Technology Corp – SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER with CLOSED CAPTION DECODER and ON-SCREEN DISPLAY CONTROLLER

M3727GM6/M8–XXXSP/FP M37272E8SP/FP
10. ABSOLUTE MAXIMUM RATINGS
Symbol
Parametear
Conditions
Ratings
Unit
VCC, AVCC Power source voltage VCC, AVCC
–0.3 to 6
V
VI
Input voltage CNVSS
All voltages are based
–0.3 to 6
V
VI
Input voltage
P00–P07, P10–P17, P20–P27, P30,
______
P31, P50, P51, XIN, RESET, CVIN
on VSS.
Output transistors are
–0.3–VCC + 0.3
V
VO
Output voltage P00–P07, P10–P17, P20–P27,
P30, P31, P52–P55, XOUT
cut off.
–0.3–VCC + 0.3
V
IOH
Circuit current P10–P17, P20–P27, P30, P31
P52–P55
0 to 1 (See note 1)
mA
IOL1
Circuit current P00–P07, P10, P15–P17, P20–P23,
P26, P27, P52–P55
IOL2
Circuit current P11–P04
IOL3
Circuit current P24, P25, P30, P31
Pd
Power dissipation
Ta = 25 °C
0 to 2 (See note 2)
mA
0 to 6 (See note 2)
mA
0 to 10 (See note 3)
mA
550
mW
Topr
Operating temperature
–10 to 70
°C
Tstg
Storage temperature
–40 to 125
°C
11. RECOMMENDED OPERATING CONDITIONS (Ta = –10 °C to 70 °C, VCC = 5 V ± 10 %, unless otherwise noted)
Symbol
Parametear
Limits
Min.
Typ.
Unit
Max.
VCC, AVCC Power source voltage (See note 4)
4.5
5.0
5.5 V
VSS
Power source voltage
0
0
0V
VIH1
VIH2
VIL1
VIL2
VIL3
HIGH Input voltage P00–P07, P10–P17, P20–P27, P30, P31, P50, P51,
______
RESET, XIN
HIGH Input voltage SCL1, SCL2, SDA1, SDA2 (When using I²C-BUS)
LOW Input voltage P00–P07, P10–P17, P20–P27, P30, P31
LOW Input voltage SCL1, SCL2, SDA1, SDA2 (When using I²C-BUS)
LOW Input voltage (See note 6)
______
P50, P51, RESET, XIN, OSC1, TIM2,
TIM3, INT1, INT2, INT3, SIN, SCLK
0.8 VCC
0.7 VCC
0
0
0
VCC V
VCC V
0.4 VCC V
0.3 VCC V
0.2 VCC V
IOH
HIGH average output current (See note1) P10–P17, P20–P27, P30, P31, P52–P55
1 mA
IOL1
LOW average output current (See note 2) P00–P07, P10, P15–P17, P20–P23,
P26, P27, P52–P55
2 mA
IOL2
LOW average output current (See note 2) P11–P14
6 mA
IOL3
LOW average output current (See note 3) P24, P25, P30, P31
10 mA
f(XIN)
Oscillation frequency (for CPU operation) (See note 5) XIN
7.9
8.0
8.1 MHz
f(XCIN)
Oscillation frequency (for sub-clock operation)
XCIN
29
32
35 kHz
fOSC
Oscillation frequency (for OSD)
OSC1
26.5
27.0
27.0 MHz
fhs1
Input frequency
TIM2, TIM3, INT1, INT2, INT3
100 kHz
fhs2
Input frequency
SCLK
1 MHz
fhs3
Input frequency
SCL1, SCL2
400 kHz
fhs4
Input frequency
Horizontal sync. signal of video signal
VI
Input amplitude video signal CVIN
15.262
1.5
15.734
2.0
16.206 kHz
2.5 V
Rev.1.00 Apr 01, 2001 page 96 of 127
REJ03B0132-0100Z