R01DS0190EJ0100 Datasheet, PDF (59/110 Pages) Renesas Technology Corp – 32 MHz 32-bit RX MCUs, 50 DMIPS, up to 128 Kbytes of flash memory

RX111 Group
5. Electrical Characteristics
Table 5.16 Permissible Output Currents
Conditions: VCC = AVCC0 = VCC_USB = 1.8 to 3.6 V, VSS = AVSS0 = VREFL0 = VSS_USB = 0 V, T_a = –40 to +105°C
Item
Symbol Max.
Unit
Permissible output low current
(average value per pin)
Ports 40 to 44, 46, ports J6, J7
Ports other than above
I_OL
0.4
mA
8.0
Permissible output low current
Ports 40 to 44, 46, ports J6, J7
0.4
(maximum value per pin)
Ports other than above
8.0
Permissible output low current
Total of ports 40 to 44, 46, ports J6, J7
Total of ports 03, 05, ports 26, 27, ports 30, 31
I_OL
2.4
30
Total of ports 14 to 17, port 32, ports 54, 55,
30
ports C2 to C7,
ports B0, B1, B3, B5 to B7
Total of ports A0, A1, A3, A4, A6, port E
30
Total of all output pins
60
Permissible output high current
(average value per pin)
Ports 40 to 44, 46, ports J6, J7
Ports other than above
I_OH
–0.1
–4.0
Permissible output high current
(maximum value per pin)
Ports 40 to 44, 46, ports J6, J7
Ports other than above
–0.1
–4.0
Permissible output high current
Total of ports 40 to 44, 46, ports J6, J7
Total of ports 03, 05, ports 26, 27, ports 30, 31
I_OH
–0.6
–10
Total of ports 14, 15, 16, 17, port 32, ports 54, 55,
–15
ports C2 to C7,
ports B0, B1, B3, B5 to B7
Total of ports A0, A1, A3, A4, A6, port E
–15
Total of all output pins
–40
Note: • Do not exceed the permissible total supply current.
Table 5.17 Output Values of Voltage (1)
Conditions: VCC = AVCC0 = VCC_USB = 2.7 to 3.6 V, VSS = AVSS0 = VREFL0 = VSS_USB = 0 V, T_a = –40 to +10°C
Item
Symbol
Min.
Max.
Unit
Test Conditions
Output low
All output ports
(except for RIIC, port 4, and port J)
V_OL
—
0.6
—
0.4
Ports 40 to 44, 46, ports J6, J7
—
0.4
RIIC pins
Standard mode
—
0.4
Fast mode
—
0.6
Output high
All output ports (except for port 4 and port J)
V_OH
VCC – 0.5
—
Ports 40 to 44, 46, ports J6, J7
VCC – 0.5
—
V I_OL = 3.0 mA
I_OL = 1.5 mA
I_OL = 0.4 mA
I_OL = 3.0 mA
I_OL = 6.0 mA
V I_OH = –2.0 mA
I_OH = –0.1 mA
Table 5.18 Output Values of Voltage (2)
Conditions: VCC = AVCC0 = VCC_USB = 1.8 to 2.7 V, VSS = AVSS0 = VREFL0 = VSS_USB = 0 V, T_a = –40 to +105°C
Item
Symbol
Min.
Max.
Unit
Test Conditions
Output low
All output ports (except for port 4 and port J)
V_OL
—
0.6
Ports 40 to 44, 46, ports J6, J7
—
0.4
Output high
All output ports (except for port 4 and port J)
V_OH
VCC – 0.5
—
Ports 40 to 44, 46, ports J6, J7
VCC – 0.5
—
V I_OL = 1.5 mA
I_OL = 0.4 mA
V I_OH = –1.0 mA
I_OH = –0.1 mA
R01DS0190EJ0100 Rev.1.00
Jun 19, 2013
Page 59 of 107