M32C82_15 Datasheet, PDF (45/84 Pages) Renesas Technology Corp – SINGLE-CHIP 16/32-BIT CMOS MICROCOMPUTER

M32C/82 Group
5. Electrical Characteristics
Table 5.2 Recommended Operating Conditions (VCC = 3.0V to 5.5V at Topr = – 20 to 85^oC/– 40 to 85^oC⁽³⁾)
Symbol
Parameter
Standard
Unit
Min Typ Max
VCC
Supply voltage (Through VDC)
3.0 5.0 5.5 V
Supply voltage (Not through VDC)
3.0 3.3 3.6 V
AVCC
Analog supply voltage
VCC
V
VSS
Supply voltage
0
V
AVSS
Analog supply voltage
0
V
VIH
Input high ("H") P20-P27, P30-P37, P40-P47, P50-P57, P60-P67, P72-P77, P80- 0.8VCC
voltage
P87(4), P90-P97, P100-P107, P110-P114, P120-P127, P130-
VCC
V
P137, P140-P146, P150-P157(5), XIN, RESET, CNVSS, BYTE
P70, P71
0.8VCC
6.0
P00-P07, P10-P17 (In single-chip mode)
0.8VCC
VCC
V
P00-P07, P10-P17
(In memory expansion mode and microprocesor mode)
0.5VCC
VIL
Input low ("L") P20-P27, P30-P37, P40-P47, P50-P57, P60-P67, P70-P77, P80- 0
voltage
P87(4), P90-P97, P100-P107, P110-P114, P120-P127, P130-
P137, P140-P146, P150-P157(5), XIN, RESET, CNVSS, BYTE
P00-P07, P10-P17 (In single-chip mode)
0
VCC
V
0.2VCC V
0.2VCC V
IOH(peak)
IOH(avg)
IOL(peak)
IOL(avg)
f(XIN)
P00-P07, P10-P17
0
(In memory expansion mode and microprocesor mode)
Peak output
high ("H")
current⁽²⁾
P00-P07, P10-P17, P20-P27, P30-P37, P40-P47, P50-P57, P60-
P67, P72-P77, P80-P84, P86, P87, P90-P97, P100-P107, P110-
P114, P120-P127, P130-P137, P140-P146, P150-P157(5)
Average output P00-P07, P10-P17, P20-P27, P30-P37, P40-P47, P50-P57, P60-
high ("H")
P67, P72-P77, P80-P84, P86, P87, P90-P97, P100-P107, P110-
current⁽¹⁾
P114, P120-P127, P130-P137, P140-P146, P150-P157(5)
Peak output
low ("L")
current⁽²⁾
P00-P07, P10-P17, P20-P27, P30-P37, P40-P47, P50-P57, P60-
P67, P70-P77, P80-P84, P86, P87, P90-P97, P100-P107, P110-
P114, P120-P127, P130-P137, P140-P146, P150-P157(5)
Average output P00-P07, P10-P17, P20-P27, P30-P37, P40-P47, P50-P57, P60-
low ("L")
P67, P70-P77, P80-P84, P86, P87, P90-P97, P100-P107, P110-
current⁽¹⁾
P114, P120-P127, P130-P137, P140-P146, P150-P157(5)
Main clock
Through VDC
input frequency
VCC=4.2 to 5.5V
0
VCC=3.0 to 5.5V
0
Not through VDC
VCC=3.0 to 3.6V
0
0.16VCC V
-10.0 mA
-5.0 mA
10.0 mA
5.0 mA
30 MHz
20 MHz
20 MHz
f(XCIN)
Sub clock oscillation frequency
32.768 50 kHz
NOTES:
1. Output current is averaged with 100ms.
2. Total IOL(peak) for P0, P1, P2, P86, P87, P9, P10, P11, P14 and P15 must be less than or equal to 80mA.
Total IOH(peak) for P0, P1, P2, P86, P87, P9, P10, P11, P14 and P15 must be less than or equal to -80mA.
Total IOL(peak) for P3, P4, P5, P6, P7, P80 to P84, P12 and P13 must be less than or equal to 80mA.
Total IOH(peak) for P3, P4, P5, P6, P72 to P77, P80 to P84, P12 and P13 must be less than or equal to -80mA.
3. This is an option that is on request basis.
4. VIH and VIL reference for P87 applies to P87 used as a programmable input ports. It does not apply to P87 used as XCIN.
5. P11 to P15 are provided in the 144-pin package only.
Rev.1.20 Jun. 01, 2004 page 43 of 80