M16C6KA_15 Datasheet, PDF (260/270 Pages) Renesas Technology Corp – SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER Description

M16C/6KA Group
Standard Serial I/O Mode
Download function
The command downloads an execution program to RAM. Execute the command as follows:
(1) Transfer the command code “FA16” in the 1^st byte.
(2) Transfer the program size in the 2^nd and 3^rd bytes.
(3) Transfer the checksum in the 4^th byte. Check sum is calculated from all transferred data from the 5^th byte
onward.
(4) The execution program is transferred from 5^th byte onward.
After the entire program data have been transferred, the downloaded execution program will be executed
if the checksum matches.
The program size allowed to transfer varies according to the size of on-chip RAM.
CLK10
RxD10
(M16C reception data)
TxD10
(M16C transmit data)
RTS10(BUSY)
FA16
Data size Data size
(low) (high)
Check Program
sum data
Program
data
Fig.EE-7 Timing of download function
Rev.1.00 Jul 16, 2004 page 258 of 266
REJ03B0100-0100Z