M16C6KA_15 Datasheet, PDF (122/270 Pages) Renesas Technology Corp – SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER Description

M16C/6KA Group
A-D Converter
(a) Extended analog input pins
In one-shot mode and repeat mode, the input via the extended analog input pins ANEX0 and ANEX1 can
also be converted from analog to digital.
When bit 6 of the A-D control register 1 (address 03D716) is “1” and bit 7 is “0”, input via ANEX0 is converted
from analog to digital. The result of conversion is stored in A-D register 0.
When bit 6 of the A-D control register 1 (address 03D716) is “0” and bit 7 is “1”, input via ANEX1 is converted
from analog to digital. The result of conversion is stored in A-D register 1.
(b) Sample and hold
Sample and hold is selected by setting bit 0 of the A-D control register 2 (address 03D416) to “1”. When
sample and hold is selected, the rage of conversion of each pin increases. As a result, a 28 φAD cycle is
achieved with 8-bit resolution and 33φAD cycle with 10-bit resolution. Sample and hold can be selected in all
modes. However, in all modes, be sure to specify before starting A-D conversion whether sample and hold is
to be used.
Rev.1.00 Jul 16, 2004 page 120 of 266
REJ03B0100-0100Z