|
SAA8200HL Datasheet, PDF (24/71 Pages) NXP Semiconductors – Ensation Base integrated wireless audio baseband | |||
|
◁ |
Philips Semiconductors
SAA8200HL
Ensation Base integrated wireless audio baseband
7.3.1 Crystal oscillator
The crystal oscillator is a 50 MHz Pierce crystal oscillator with amplitude control. It can be
used in many applications e.g. as a digital reference for digital circuits, A/D and D/A
clocking, etc. It is a robust design and can be used across a large frequency range.
Features:
⢠On-chip biasing resistance
⢠Amplitude controlled
⢠Large frequency range: 1 MHz to 20 MHz
⢠Slave mode
⢠Power-down mode
⢠Bypass test mode.
7.3.2 Audio PLL
The audio PLL is a multi purpose PLL.
Features:
⢠Integrated PLL with on-chip Current Controlled Oscillator (CCO), no external
components for clock generation
⢠Input frequency range: 100 kHz to 150 MHz
⢠CCO output frequency: 275 MHz to 550 MHz
⢠Output frequency range: 4.3 MHz to 550 MHz
⢠Programmable pre-divider, feedback-divider and post-divider
⢠On the ï¬y adjustment of the clock possible
⢠Positive edge locking
⢠Frequency limiter to avoid hang-up of the PLL
⢠Lock detector
⢠Power-down mode
⢠Possibility to bypass whole PLL, the post-divider or the pre-divider
⢠Possibility to disable the output clock
⢠Skew mode
⢠Free running mode
⢠Scan mode
⢠Maximum peak cycle-to-cycle output jitter = 200 ps.
SAA8200HL_2
Preliminary data sheet
Rev. 02 â 17 October 2005
© Koninklijke Philips Electronics N.V. 2005. All rights reserved.
24 of 71
|
▷ |