PDI1394L11 Datasheet, PDF (24/46 Pages) NXP Semiconductors – 1394 AV link layer controller

Philips Semiconductors
1394 AV link layer controller
Product specification
PDI1394L11
13.0 REGISTER MAP
Registers are 32 bits (quadlet) wide and all accesses are always done on a quadlet basis. This means that it is not possible to write just the
lower 8 bits, and leave the other bits unaffected (see Section 12.3.2 for more information). The values written to undefined fields/bits are ignored
and thus DON’T CARE.
A full bitmap of all registers is listed in Table 8. The meaning of shading and bit cell values is as follows:
A bit/field with no name written in it and dark shading is reserved and not used.
A bit/field with a name in it and light shading is a READ ONLY (status) bit/field.
A one bit value (0 or 1) written at the bottom of a writable (control) bit is the default value after power-on-reset.
Table 8. Full Bitmap of all Registers (consists of three tables shown on the following pages)
1997 Oct 21
24