MN63Y1208 Datasheet, PDF (32/120 Pages) Panasonic Semiconductor – Built-in 4-Kbit FeRAM non-volatile memory with fast write and low power consumption

Chapter 4 RF Communication Mode
4.1 RF Communication Mode Sequence
Figure 4-1 illustrates the sequence in RF communication mode. Each sequence is described below.
SNo.1: A reader/writer sends an RF communication mode command to the RFID.
SNo.2: Once the RFID receives the RF communication mode command described in SNo.1, it processes the
command and then sends the result to the reader/writer as the response to the command.
R/W
RFID
RF communication mode command
SNo.1
Response to RF communication mode command
SNo.2
Host
Figure 4-1 RF Communication Mode Sequence
32