MN63Y1208 Datasheet, PDF(26/120 Page) Panasonic Semiconductor – Built-in 4-Kbit FeRAM non-volatile memory with fast write and low power consumption

English

English German Russian Spanish Italian Polish Chinese Japanese Korean French Portuguese	Language :

MN63Y1208 Datasheet, PDF (26/120 Pages) Panasonic Semiconductor – Built-in 4-Kbit FeRAM non-volatile memory with fast write and low power consumption

◁

Chapter 3 Memory Map

SC (2 bytes)

SC is used as the JISX6319-4 system code (2 bytes). For more information about system code, see Section

4.2.5.1 System Code.

Table 3-14 SC Parameter

Address

JISX6319-4

system code (2 bytes)

Default

0x01E0 0x01E1

0xAA

0xFF

IDM (8 bytes)

IDM is used as JISX6319-4 PICC (Proximity IC Card) identifier (8 bytes). The PUPI (Pseudo-Unique PICC

Identifier) (4 bytes) of ISO/IEC14443 TypeB is shared with the lower 4 bytes of the JISX6319-4 PICC

identifier. For information about JISX6319-4 PICC identifier, see Section 4.2.5.2 PICC (Proximity IC Card)

Identifier, and for information about ISO/IEC14443 TypeB PUPI, see Section 4.3.8.2 PUPI.

Table 3-15 IDM Parameter

Address

0x01E2 0x01E3 0x01E4 0x01E5 0x01E6

JISX6319-4

PICC identifier (8 bytes)

Default

0x02

0xFE

0x00

ISO/IEC14443TypeB

PUPI (4 bytes)

Default

Reserved

0x00

0x1E7

0x00

0x1E8 0x01E9

0x00 0x00

Note: In order to validate the value written in the system area IDM, the HW parameter's IDMSEL must be set

to 1. See Table 3-9.

PMM (2 bytes)

Of the JISX6319-4 response time descriptor (8 bytes), PMM is an area (2 bytes) to specify maximum wait time

for the response to READ/WRITE commands. See Section 4.2.5.3 .

Table 3-16 PMM Parameter

Address

JISX6319-4

Response time descriptor (2 bytes)

Default

0x01EA

0xFF

0x01EB

0xFF

▷