MC68HC12 Datasheet, PDF (97/478 Pages) Motorola, Inc – The MC68HC912DT128A microcontroller unit (MCU) is a 16-bit device composed of standard on-chip peripherals including a 16-bit central processing unit

Resource Mapping
Miscellaneous System Control Register
NDRF — Narrow Data Bus for Register-Following Map Space
This bit enables a narrow bus feature for the 1K byte Register-
Following Map. This is useful for accessing 8-bit peripherals and
allows 8-bit and 16-bit external memory devices to be mixed in a
system. In Expanded Narrow (eight bit) modes, Single Chip Modes,
and Peripheral mode, this bit has no effect.
0 = Makes Register-Following MAP space act as a full 16 bit data
bus.
1 = Makes the Register-Following MAP space act the same as an
8 bit only external data bus (data only goes through port A
externally).
The Register-Following space is mapped from $0400 to $07FF after
reset, which is next to the register map. If the registers are moved this
space follows.
RFSTR1, RFSTR0 — Register Following Stretch
This two bit field determines the amount of clock stretch on accesses
to the 1K byte Register Following Map. It is valid regardless of the
state of the NDRF bit. In Single Chip and Peripheral Modes this bit
has no meaning or effect.
Table 6-5. RFSTR Stretch Bit Definition
RFSTR1
0
0
1
1
RFSTR0
0
1
0
1
Number of E Clocks
Stretched
0
1
2
3
EXSTR1, EXSTR0 — External Access Stretch
This two bit field determines the amount of clock stretch on accesses
to an external address space. In Single Chip and Peripheral Modes
this bit has no meaning or effect.
MC68HC912DT128A — Rev 4.0
MOTOROLA
Resource Mapping
Technical Data
97