MC68HC12 Datasheet, PDF (421/478 Pages) Motorola, Inc – The MC68HC912DT128A microcontroller unit (MCU) is a 16-bit device composed of standard on-chip peripherals including a 16-bit central processing unit

Technical Data — MC68HC912DT128A
Section 21. Electrical Specifications
21.1 Contents
21.2 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 421
21.3 Tables of Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 422
21.2 Introduction
The MC68HC912DT128A microcontroller unit (MCU) is a16-bit device
composed of standard on-chip peripherals including a 16-bit central
processing unit (CPU12), 128-Kbyte flash EEPROM, 8K byte RAM, 2K
byte EEPROM, two asynchronous serial communications interfaces
(SCI), a serial peripheral interface (SPI), an 8-channel, 16-bit timer,
two16-bit pulse accumulators and 16-bit down counter (ECT), two 10-bit
analog-to-digital converter (ADC), a four-channel pulse-width modulator
(PWM), an IIC interface module, and three MSCAN modules. The chip
is the first 16-bit microcontroller to include both byte-erasable EEPROM
and flash EEPROM on the same device. System resource mapping,
clock generation, interrupt control and bus interfacing are managed by
the Lite integration module (LIM). The MC68HC912DT128A has full 16-
bit data paths throughout, however, the multiplexed external bus can
operate in an 8-bit narrow mode so single 8-bit wide memory can be
interfaced for lower cost systems.
MC68HC912DT128A — Rev 4.0
MOTOROLA
Electrical Specifications
Technical Data
421