MC68HC12 Datasheet, PDF (359/478 Pages) Motorola, Inc – The MC68HC912DT128A microcontroller unit (MCU) is a 16-bit device composed of standard on-chip peripherals including a 16-bit central processing unit

MSCAN Controller
Programmer’s Model of Control Registers
RERRIE — Receiver Error Passive Interrupt Enable
0 = No interrupt will be generated from this event.
1 = A receiver error passive status event will result in an error
interrupt.
TERRIE — Transmitter Error Passive Interrupt Enable
0 = No interrupt will be generated from this event.
1 = A transmitter error passive status event will result in an error
interrupt.
BOFFIE — BUSOFF Interrupt Enable
0 = No interrupt will be generated from this event.
1 = A BUSOFF event will result in an error interrupt.
OVRIE — Overrun Interrupt Enable
0 = No interrupt will be generated from this event.
1 = An overrun event will result in an error interrupt.
RXFIE — Receiver Full Interrupt Enable
0 = No interrupt will be generated from this event.
1 = A receive buffer full (successful message reception) event will
result in a receive interrupt.
NOTE: The CRIER register is held in the reset state if the SFTRES bit in CMCR0
is set.
MC68HC912DT128A — Rev 4.0
MOTOROLA
MSCAN Controller
Technical Data
359