M38002M4 Datasheet, PDF (110/173 Pages) Mitsubishi Electric Semiconductor – 8-BIT SINGLE-CHIP MICROCOMPUTER

APPENDIX
3.1 Electrical characteristics
3.1.5 Absolute maximum ratings (Extended operating temperature version)
Table 3.1.12 Absolute maximum ratings (Extended operating temperature version)
Symbol
VCC
VI
VI
VI
VO
Pd
Topr
Tstg
Parameter
Power source voltage
Input voltage P00–P07, P10–P17, P20–P27,
P30–P37, P40–P47, P50–P57,
P60–P67, P70, P71
Input voltage RESET, XIN
Input voltage CNVSS
Output voltage P00–P07, P10–P17, P20–P27,
P30–P37, P40–P47, P50–P57,
P60–P67, P70, P71, XOUT
Power dissipation
Operating temperature
Storage temperature
Conditions
All voltages are based on VSS.
Output transistors are cut off.
Ta = 25 °C
Note : 300 mW in case of the flat package.
Ratings
Unit
–0.3 to 7.0
V
–0.3 to VCC +0.3
V
–0.3 to VCC +0.3
V
–0.3 to 13
V
–0.3 to VCC +0.3
V
1000(Note)
mW
–40 to 85
°C
–65 to 150
°C
3.1.6 Recommended operating conditions (Extended operating temperature version)
Table 3.1.13 Recommended operating conditions (Extended operating temperature version)
(VCC = 4.0 to 5.5 V, Ta = –40 to 85 °C, unless otherwise noted)
Symbol
VCC
VSS
VIH
VIH
VIL
VIL
VIL
ΣIOH(peak)
ΣIOH(peak)
ΣIOL(peak)
ΣIOL(peak)
ΣIOH(avg)
ΣIOH(avg)
ΣIOL(avg)
ΣIOL(avg)
IOH(peak)
IOL(peak)
IOH(avg)
IOL(avg)
f(XIN)
Parameter
Power source voltage
Power source voltage
“H” input voltage
P00–P07, P10–P17, P20–P27, P30–P37, P40–P47,
P50–P57, P60–P67, P70, P71
“H” input voltage
RESET, XIN, CNVSS
“L” input voltage
P00–P07, P10–P17, P20–P27, P30–P37, P40–P47,
P50–P57, P60–P67, P70, P71
“L” input voltage
RESET, CNVSS
“L” input voltage
XIN
“H” total peak output current P00–P07, P10–P17, P20–P27, P30–P37 (Note 1)
“H” total peak output current P40–P47,P50–P57, P60–P67, P70, P71 (Note 1)
“L” total peak output current
P00–P07, P10–P17, P20–P27, P30–P37 (Note 1)
“L” total peak output current
P40–P47,P50–P57, P60–P67, P70, P71 (Note 1)
“H” total average output current P00–P07, P10–P17, P20–P27, P30–P37 (Note 1)
“H” total average output current P40–P47,P50–P57, P60–P67, P70, P71 (Note 1)
“L” total average output current P00–P07, P10–P17, P20–P27, P30–P37 (Note 1)
“L” total average output current P40–P47,P50–P57, P60–P67, P70, P71 (Note 1)
“H” peak output current
P00–P07, P10–P17, P20–P27, P30–P37, P40–P47,
P50–P57, P60–P67, P70, P71 (Note 2)
“L” peak output current
P00–P07, P10–P17, P20–P27, P30–P37, P40–P47,
P50–P57, P60–P67, P70, P71 (Note 2)
“H” average output current
P00–P07, P10–P17, P20–P27, P30–P37, P40–P47,
P50–P57, P60–P67, P70, P71 (Note 3)
“L” average output current
P00–P07, P10–P17, P20–P27, P30–P37, P40–P47,
P50–P57, P60–P67, P70, P71 (Note 3)
Internal clock oscillation frequency
Limits
Unit
Min. Typ. Max.
4.0
5.0
5.5
V
0
V
0.8 VCC
VCC
V
0.8 VCC
0
VCC
V
0.2 VCC V
0
0.2 VCC V
0
0.16 VCC V
–80 mA
–80 mA
80 mA
80 mA
–40 mA
–40 mA
40 mA
40 mA
–10 mA
10 mA
–5 mA
5 mA
8 MHz
Note 1: The total output current is the sum of all the currents flowing through all the applicable ports. The total average current is an aver-
age value measured over 100 ms. The total peak current is the peak value of all the currents.
2: The peak output current is the peak current flowing in each port.
3: The average output current IOL(avg), IOH(avg) in an average value measured over 100 ms.
3-8
3800 GROUP USER’S MANUAL