M1A3P250-1VQ100I Datasheet, PDF (202/210 Pages) Microsemi Corporation – ProASIC3 Flash Family FPGAs with Optional Soft ARM Support

Datasheet Information
Revision
Changes
Revision 2 (cont’d) The "ProASIC3 FPGAs Package Sizes Dimensions" table is new.
In the "ProASIC3 Ordering Information", the QN package measurements were
updated to include both 0.4 mm and 0.5 mm.
In the General Description section the number of I/Os was updated from 288 to
300.
Packaging v1.2
The "QN68 – Bottom View" section is new.
Revision 1 (Feb 2008) In Table 2-2 • Recommended Operating Conditions ¹, T_J was listed in the symbol
DC and Switching
column and was incorrect. It was corrected and changed to T_A.
Characteristics v1.1
In Table 2-3 • Flash Programming Limits – Retention, Storage and Operating
Temperature, Maximum Operating Junction Temperature was changed from
110°C to 100°C for both commercial and industrial grades.
The "PLL Behavior at Brownout Condition" section is new.
In the "PLL Contribution—PPLL" section, the following was deleted:
FCLKIN is the input clock frequency.
In Table 2-21 • Summary of Maximum and Minimum DC Input Levels, the note
was incorrect. It previously said T_J and it was corrected and changed to T_A.
In Table 2-115 • ProASIC3 CCC/PLL Specification, the SCLK parameter and note
1 are new.
Table 2-125 • JTAG 1532 was populated with the parameter data, which was not
in the previous version of the document.
Packaging v1.1
In the "VQ100" A3P030 pin table, the function of pin 63 was incorrect and
changed from IO39RSB0 to GDB0/IO38RSB0.
Revision 0 (Jan 2008) This document was previously in datasheet v2.2. As a result of moving to the
handbook format, Actel has restarted the version numbers.
v2.2
(July 2007)
The M7 and M1 device part numbers have been updated in Table 1 • ProASIC3
Product Family, "I/Os Per Package", "Automotive ProASIC3 Ordering
Information", "Temperature Grade Offerings", and "Speed Grade and
Temperature Grade Matrix".
The words "ambient temperature" were added to the temperature range in the
"Automotive ProASIC3 Ordering Information", "Temperature Grade Offerings",
and "Speed Grade and Temperature Grade Matrix" sections.
v2.1
(May 2007)
The T_J parameter in Table 3-2 • Recommended Operating Conditions was
changed to T_A, ambient temperature, and table notes 4–6 were added.
In the "Clock Conditioning Circuit (CCC) and PLL" section, the Wide Input
Frequency Range (1.5 MHz to 200 MHz) was changed to (1.5 MHz to 350 MHz).
The "Clock Conditioning Circuit (CCC) and PLL" section was updated.
In the "I/Os Per Package" section, the A3P030, A3P060, A3P125, ACP250, and
A3P600 device I/Os were updated.
Table 3-5 • Package Thermal Resistivities was updated with A3P1000
information. The note below the table is also new.
Page
II
III
1-1
4-3
2-2
2-2
2-3
2-13
2-20
2-89
2-107
4-19
N/A
i, ii, iii,
iii, iv
iii, iv
3-2
i
i
ii
3-5
5-6
Revision 15