PIC16F882_09 Datasheet, PDF (51/328 Pages) Microchip Technology – 28/40/44-Pin, Enhanced Flash-Based 8-Bit CMOS Microcontrollers with nanoWatt Technology

PIC16F882/883/884/886/887
REGISTER 3-7: WPUB: WEAK PULL-UP PORTB REGISTER
R/W-1
WPUB7
bit 7
R/W-1
WPUB6
R/W-1
WPUB5
R/W-1
WPUB4
R/W-1
WPUB3
R/W-1
WPUB2
R/W-1
WPUB1
R/W-1
WPUB0
bit 0
Legend:
R = Readable bit
-n = Value at POR
W = Writable bit
‘1’ = Bit is set
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
x = Bit is unknown
bit 7-0
WPUB<7:0>: Weak Pull-up Register bit
1 = Pull-up enabled
0 = Pull-up disabled
Note 1: Global RBPU bit of the OPTION register must be cleared for individual pull-ups to be enabled.
2: The weak pull-up device is automatically disabled if the pin is in configured as an output.
REGISTER 3-8: IOCB: INTERRUPT-ON-CHANGE PORTB REGISTER
R/W-0
IOCB7
bit 7
R/W-0
IOCB6
R/W-0
IOCB5
R/W-0
IOCB4
R/W-0
IOCB3
R/W-0
IOCB2
R/W-0
IOCB1
R/W-0
IOCB0
bit 0
Legend:
R = Readable bit
-n = Value at POR
W = Writable bit
‘1’ = Bit is set
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
x = Bit is unknown
bit 7-0
IOCB<7:0>: Interrupt-on-Change PORTB Control bit
1 = Interrupt-on-change enabled
0 = Interrupt-on-change disabled
© 2009 Microchip Technology Inc.
DS41291F-page 49