PIC16F1946 Datasheet, PDF (289/440 Pages) Microchip Technology – 64-Pin Flash-Based, 8-Bit CMOS Microcontrollers with LCD Driver and nanoWatt XLP Technology

PIC16F/LF1946/47
REGISTER 23-5: SSPxMSK: SSPx MASK REGISTER
R/W-1/1
bit 7
R/W-1/1
R/W-1/1
R/W-1/1 R/W-1/1
MSK<7:0>
R/W-1/1
R/W-1/1
R/W-1/1
bit 0
Legend:
R = Readable bit
u = Bit is unchanged
‘1’ = Bit is set
W = Writable bit
x = Bit is unknown
‘0’ = Bit is cleared
U = Unimplemented bit, read as ‘0’
-n/n = Value at POR and BOR/Value at all other Resets
bit 7-1
bit 0
MSK<7:1>: Mask bits
1 = The received address bit n is compared to SSPxADD<n> to detect I²C address match
0 = The received address bit n is not used to detect I²C address match
MSK<0>: Mask bit for I²C Slave mode, 10-bit Address
I²C Slave mode, 10-bit address (SSPxM<3:0> = 0111 or 1111):
1 = The received address bit 0 is compared to SSPxADD<0> to detect I²C address match
0 = The received address bit 0 is not used to detect I²C address match
I²C Slave mode, 7-bit address, the bit is ignored
REGISTER 23-6: SSPxADD: MSSPx ADDRESS AND BAUD RATE REGISTER (I²C MODE)
R/W-0/0
bit 7
R/W-0/0
R/W-0/0
R/W-0/0
R/W-0/0
ADD<7:0>
R/W-0/0
R/W-0/0
R/W-0/0
bit 0
Legend:
R = Readable bit
u = Bit is unchanged
‘1’ = Bit is set
W = Writable bit
x = Bit is unknown
‘0’ = Bit is cleared
U = Unimplemented bit, read as ‘0’
-n/n = Value at POR and BOR/Value at all other Resets
Master mode:
bit 7-0
ADD<7:0>: Baud Rate Clock Divider bits
SCLx pin clock period = ((ADD<7:0> + 1) *4)/FOSC
10-Bit Slave mode – Most Significant Address byte:
bit 7-3
bit 2-1
bit 0
Not used: Unused for Most Significant Address byte. Bit state of this register is a “don’t care”. Bit
pattern sent by master is fixed by I²C specification and must be equal to ‘11110’. However, those bits
are compared by hardware and are not affected by the value in this register.
ADD<2:1>: Two Most Significant bits of 10-bit address
Not used: Unused in this mode. Bit state is a “don’t care”.
10-Bit Slave mode – Least Significant Address byte:
bit 7-0
ADD<7:0>: Eight Least Significant bits of 10-bit address
7-Bit Slave mode:
bit 7-1
bit 0
ADD<7:1>: 7-bit address
Not used: Unused in this mode. Bit state is a “don’t care”.
 2010 Microchip Technology Inc.
Preliminary
DS41414A-page 287