70592C Datasheet, PDF (285/314 Pages) Microchip Technology – High-Performance, 16-bit Microcontrollers

PIC24HJXXXGPX06A/X08A/X10A
25.0 HIGH TEMPERATURE ELECTRICAL CHARACTERISTICS
This section provides an overview of PIC24HJXXXGPX06A/X08A/X10A electrical characteristics for devices operating
in an ambient temperature range of -40°C to +150°C.
Note: Programming of the Flash memory is not allowed above 125°C.
The specifications between -40°C to +150°C are identical to those shown in Section 24.0 “Electrical Characteristics”
for operation between -40°C to +125°C, with the exception of the parameters listed in this section.
Parameters in this section begin with an H, which denotes High temperature. For example, parameter DC10 in
Section 24.0 “Electrical Characteristics” is the Industrial and Extended temperature equivalent of HDC10.
Absolute maximum ratings for the PIC24HJXXXGPX06A/X08A/X10A high temperature devices are listed below.
Exposure to these maximum rating conditions for extended periods can affect device reliability. Functional operation of
the device at these or any other conditions above the parameters indicated in the operation listings of this specification
is not implied.
Absolute Maximum Ratings⁽¹⁾
Ambient temperature under bias⁽⁴⁾ .........................................................................................................-40°C to +150°C
Storage temperature .............................................................................................................................. -65°C to +160°C
Voltage on VDD with respect to VSS ......................................................................................................... -0.3V to +4.0V
Voltage on any pin that is not 5V tolerant with respect to VSS⁽⁵⁾ .................................................... -0.3V to (VDD + 0.3V)
Voltage on any 5V tolerant pin with respect to VSS when VDD < 3.0V⁽⁵⁾ ....................................... -0.3V to (VDD + 0.3V)
Voltage on any 5V tolerant pin with respect to VSS when VDD ≥ 3.0V⁽⁵⁾ .................................................... -0.3V to 5.6V
Voltage on VCAP with respect to VSS ...................................................................................................... 2.25V to 2.75V
Maximum current out of VSS pin .............................................................................................................................60 mA
Maximum current into VDD pin⁽²⁾.............................................................................................................................60 mA
Maximum junction temperature............................................................................................................................. +155°C
Maximum output current sunk by any I/O pin⁽³⁾ ........................................................................................................1 mA
Maximum output current sourced by any I/O pin⁽³⁾...................................................................................................1 mA
Maximum current sunk by all ports combined ........................................................................................................10 mA
Maximum current sourced by all ports combined⁽²⁾ ................................................................................................10 mA
Note 1: Stresses above those listed under “Absolute Maximum Ratings” can cause permanent damage to the
device. This is a stress rating only, and functional operation of the device at those or any other conditions
above those indicated in the operation listings of this specification is not implied. Exposure to maximum
rating conditions for extended periods can affect device reliability.
2: Maximum allowable current is a function of device maximum power dissipation (see Table 25-2).
3: Unlike devices at 125°C and below, the specifications in this section also apply to the CLKOUT, VREF+,
VREF-, SCLx, SDAx, PGECx, and PGEDx pins.
4: AEC-Q100 reliability testing for devices intended to operate at 150°C is 1,000 hours. Any design in which
the total operating time from 125°C to 150°C will be greater than 1,000 hours is not warranted without prior
written approval from Microchip Technology Inc.
5: Refer to the “Pin Diagrams” section for 5V tolerant pins.
© 2011 Microchip Technology Inc.
DS70592C-page 285