70592C Datasheet, PDF (250/314 Pages) Microchip Technology – High-Performance, 16-bit Microcontrollers

PIC24HJXXXGPX06A/X08A/X10A
TABLE 24-12: DC CHARACTERISTICS: PROGRAM MEMORY
DC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤TA ≤+125°C for Extended
Param
No.
Symbol
Characteristic
Min Typ⁽¹⁾ Max Units
Conditions
Program Flash Memory
D130 EP
Cell Endurance
10,000 —
— E/W
D131 VPR VDD for Read
VMIN —
3.6
V VMIN = Minimum operating
voltage
D132b VPEW VDD for Self-Timed Write VMIN —
3.6
V VMIN = Minimum operating
voltage
D134 TRETD Characteristic Retention
20
—
— Year Provided no other specifications are
violated
D135 IDDP
Supply Current during
Programming
—
10
— mA
D136a TRW Row Write Time
1.32 —
1.74
ms TRW = 11064 FRC cycles,
TA = +85°C, See Note 2
D136b TRW Row Write Time
1.28 —
1.79
ms TRW = 11064 FRC cycles,
TA = +125°C, See Note 2
D137a TPE
Page Erase Time
20.1 —
26.5
ms TPE = 168517 FRC cycles,
TA = +85°C, See Note 2
D137b TPE
Page Erase Time
19.5 —
27.3
ms TPE = 168517 FRC cycles,
TA = +125°C, See Note 2
D138a TWW Word Write Cycle Time
42.3 —
55.9
µs TWW = 355 FRC cycles,
TA = +85°C, See Note 2
D138b TWW Word Write Cycle Time
41.1 —
57.6
µs TWW = 355 FRC cycles,
TA = +125°C, See Note 2
Note 1: Data in “Typ” column is at 3.3V, 25°C unless otherwise stated.
2: Other conditions: FRC = 7.37 MHz, TUN<5:0> = b'011111 (for Min), TUN<5:0> = b'100000 (for Max).
This parameter depends on the FRC accuracy (see Table 24-19) and the value of the FRC Oscillator Tun-
ing register (see Register 9-4). For complete details on calculating the Minimum and Maximum time see
Section 5.3 “Programming Operations”.
TABLE 24-13: INTERNAL VOLTAGE REGULATOR SPECIFICATIONS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤TA ≤+125°C for Extended
Param
No.
Symbol
Characteristics
Min Typ Max Units
Comments
CEFC
External Filter Capacitor
Value
4.7
10
—
μF Capacitor must be low
series resistance
(< 5 Ohms)
DS70592C-page 250
© 2011 Microchip Technology Inc.