70592C Datasheet, PDF (241/314 Pages) Microchip Technology – High-Performance, 16-bit Microcontrollers

PIC24HJXXXGPX06A/X08A/X10A
24.0 ELECTRICAL CHARACTERISTICS
This section provides an overview of PIC24HJXXXGPX06A/X08A/X10A electrical characteristics. Additional
information is provided in future revisions of this document as it becomes available.
Absolute maximum ratings for the PIC24HJXXXGPX06A/X08A/X10A family are listed below. Exposure to these maxi-
mum rating conditions for extended periods can affect device reliability. Functional operation of the device at these or
any other conditions above the parameters indicated in the operation listings of this specification is not implied.
Absolute Maximum Ratings⁽¹⁾
Ambient temperature under bias.............................................................................................................-40°C to +125°C
Storage temperature .............................................................................................................................. -65°C to +160°C
Voltage on VDD with respect to VSS ......................................................................................................... -0.3V to +4.0V
Voltage on any pin that is not 5V tolerant with respect to VSS⁽⁴⁾ .................................................... -0.3V to (VDD + 0.3V)
Voltage on any 5V tolerant pin with respect to VSS when VDD ≥ 3.0V⁽⁴⁾ .................................................. -0.3V to +5.6V
Voltage on any 5V tolerant pin with respect to VSS when VDD < 3.0V⁽⁴⁾ ..................................................... -0.3V to 3.6V
Voltage on VCAP with respect to VSS ...................................................................................................... 2.25V to 2.75V
Maximum current out of VSS pin ...........................................................................................................................300 mA
Maximum current into VDD pin⁽²⁾...........................................................................................................................250 mA
Maximum output current sunk by any I/O pin⁽³⁾ ........................................................................................................4 mA
Maximum output current sourced by any I/O pin⁽³⁾...................................................................................................4 mA
Maximum current sunk by all ports .......................................................................................................................200 mA
Maximum current sourced by all ports⁽²⁾...............................................................................................................200 mA
Note 1: Stresses above those listed under “Absolute Maximum Ratings” can cause permanent damage to the
device. This is a stress rating only, and functional operation of the device at those or any other conditions
above those indicated in the operation listings of this specification is not implied. Exposure to maximum
rating conditions for extended periods can affect device reliability.
2: Maximum allowable current is a function of device maximum power dissipation (see Table 24-2).
3: Exceptions are CLKOUT, which is able to sink/source 25 mA, and the VREF+, VREF-, SCLx, SDAx, PGECx
and PGEDx pins, which are able to sink/source 12 mA.
4: See the “Pin Diagrams” section for 5V tolerant pins.
© 2011 Microchip Technology Inc.
DS70592C-page 241