PIC18F2220 Datasheet, PDF (235/388 Pages) Microchip Technology – 28/40/44-Pin High-Performance, Enhanced Flash Microcontrollers with 10-Bit A/D and nanoWatt Technology

PIC18F2220/2320/4220/4320
22.1 Control Register
The Low-Voltage Detect Control register controls the
operation of the Low-Voltage Detect circuitry.
REGISTER 22-1:
LVDCON REGISTER
U-0
U-0
—
—
bit 7
R-0
IRVST
R/W-0
LVDEN
R/W-0
LVDL3
R/W-1
LVDL2
R/W-0
LVDL1
R/W-1
LVDL0
bit 0
bit 7-6
bit 5
bit 4
bit 3-0
Unimplemented: Read as ‘0’
IRVST: Internal Reference Voltage Stable Flag bit
1 = Indicates that the Low-Voltage Detect logic will generate the interrupt flag at the specified
voltage range
0 = Indicates that the Low-Voltage Detect logic will not generate the interrupt flag at the
specified voltage range and the LVD interrupt should not be enabled
LVDEN: Low-Voltage Detect Power Enable bit
1 = Enables LVD, powers up LVD circuit
0 = Disables LVD, powers down LVD circuit
LVDL3:LVDL0: Low-Voltage Detection Limit bits
1111 = External analog input is used (input comes from the LVDIN pin)
1110 = 4.50V-4.78V
1101 = 4.20V-4.46V
1100 = 4.00V-4.26V
1011 = 3.80V-4.04V
1010 = 3.60V-3.84V
1001 = 3.50V-3.72V
1000 = 3.30V-3.52V
0111 = 3.00V-3.20V
0110 = 2.80V-2.98V
0101 = 2.70V-2.86V
0100 = 2.50V-2.66V
0011 = 2.40V-2.55V
0010 = 2.20V-2.34V
0001 = 2.00V-2.12V
0000 = Reserved
Note: LVDL3:LVDL0 modes which result in a trip point below the valid operating voltage
of the device are not tested.
Legend:
R = Readable bit
- n = Value at POR
W = Writable bit
‘1’ = Bit is set
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared x = Bit is unknown
 2003 Microchip Technology Inc.
DS39599C-page 233