PIC18F6520-I Datasheet, PDF (19/380 Pages) Micrel Semiconductor – 64/80-Pin High-Performance, 256 Kbit to 1 Mbit Enhanced Flash Microcontrollers with A/D

PIC18F6520/8520/6620/8620/6720/8720
TABLE 1-2: PIC18FXX20 PINOUT I/O DESCRIPTIONS (CONTINUED)
Pin Name
Pin Number
Pin
PIC18F6X20 PIC18F8X20 ^Type
Buffer
Type
Description
PORTF is a bidirectional I/O port.
RF0/AN5
RF0
AN5
18
24
I/O
ST
Digital I/O.
I Analog
Analog input 5.
RF1/AN6/C2OUT
17
RF1
AN6
C2OUT
23
I/O
ST
Digital I/O.
I Analog
Analog input 6.
O
ST
Comparator 2 output.
RF2/AN7/C1OUT
16
RF2
AN7
C1OUT
18
I/O
ST
Digital I/O.
I Analog
Analog input 7.
O
ST
Comparator 1 output.
RF3/AN8
RF1
AN8
15
17
I/O
ST
Digital I/O.
I Analog
Analog input 8.
RF4/AN9
RF1
AN9
14
16
I/O
ST
Digital I/O.
I Analog
Analog input 9.
RF5/AN10/CVREF
13
RF1
AN10
CVREF
15
I/O
ST
Digital I/O.
I Analog
Analog input 10.
O Analog
Comparator VREF output.
RF6/AN11
RF6
AN11
12
14
I/O
ST
Digital I/O.
I Analog
Analog input 11.
RF7/SS
RF7
SS
11
13
I/O
ST
Digital I/O.
I
TTL
SPI slave select input.
Legend:
TTL = TTL compatible input
ST = Schmitt Trigger input with CMOS levels
I = Input
P = Power
CMOS = CMOS compatible input or output
Analog = Analog input
O
= Output
OD = Open-Drain (no P diode to VDD)
Note 1: Alternate assignment for CCP2 when CCP2MX is not selected (all operating modes except
Microcontroller).
2: Default assignment when CCP2MX is set.
3: External memory interface functions are only available on PIC18F8X20 devices.
4: CCP2 is multiplexed with this pin by default when configured in Microcontroller mode. Otherwise, it is
multiplexed with either RB3 or RC1.
5: PORTH and PORTJ are only available on PIC18F8X20 (80-pin) devices.
6: AVDD must be connected to a positive supply and AVSS must be connected to a ground reference for
proper operation of the part in user or ICSP modes. See parameter D001A for details.
 2004 Microchip Technology Inc.
DS39609B-page 17