English
Language : 

PIC18F6520-I Datasheet, PDF (17/380 Pages) Micrel Semiconductor – 64/80-Pin High-Performance, 256 Kbit to 1 Mbit Enhanced Flash Microcontrollers with A/D
PIC18F6520/8520/6620/8620/6720/8720
TABLE 1-2: PIC18FXX20 PINOUT I/O DESCRIPTIONS (CONTINUED)
Pin Name
Pin Number
Pin
PIC18F6X20 PIC18F8X20 Type
Buffer
Type
Description
PORTD is a bidirectional I/O port. These
pins have TTL input buffers when external
memory is enabled.
RD0/PSP0/AD0
RD0
PSP0
AD0(3)
58
72
I/O
ST
Digital I/O.
I/O
TTL
Parallel Slave Port data.
I/O
TTL
External memory address/data 0.
RD1/PSP1/AD1
RD1
PSP1
AD1(3)
55
69
I/O
ST
Digital I/O.
I/O
TTL
Parallel Slave Port data.
I/O
TTL
External memory address/data 1.
RD2/PSP2/AD2
RD2
PSP2
AD2(3)
54
68
I/O
ST
Digital I/O.
I/O
TTL
Parallel Slave Port data.
I/O
TTL
External memory address/data 2.
RD3/PSP3/AD3
RD3
PSP3
AD3(3)
53
67
I/O
ST
Digital I/O.
I/O
TTL
Parallel Slave Port data.
I/O
TTL
External memory address/data 3.
RD4/PSP4/AD4
RD4
PSP4
AD4(3)
52
66
I/O
ST
Digital I/O.
I/O
TTL
Parallel Slave Port data.
I/O
TTL
External memory address/data 4.
RD5/PSP5/AD5
RD5
PSP5
AD5(3)
51
65
I/O
ST
Digital I/O.
I/O
TTL
Parallel Slave Port data.
I/O
TTL
External memory address/data 5.
RD6/PSP6/AD6
RD6
PSP6
AD6(3)
50
64
I/O
ST
Digital I/O.
I/O
TTL
Parallel Slave Port data.
I/O
TTL
External memory address/data 6.
RD7/PSP7/AD7
RD7
PSP7
AD7(3)
49
63
I/O
ST
Digital I/O.
I/O
TTL
Parallel Slave Port data.
I/O
TTL
External memory address/data 7.
Legend:
TTL = TTL compatible input
ST = Schmitt Trigger input with CMOS levels
I = Input
P = Power
CMOS = CMOS compatible input or output
Analog = Analog input
O
= Output
OD = Open-Drain (no P diode to VDD)
Note 1: Alternate assignment for CCP2 when CCP2MX is not selected (all operating modes except
Microcontroller).
2: Default assignment when CCP2MX is set.
3: External memory interface functions are only available on PIC18F8X20 devices.
4: CCP2 is multiplexed with this pin by default when configured in Microcontroller mode. Otherwise, it is
multiplexed with either RB3 or RC1.
5: PORTH and PORTJ are only available on PIC18F8X20 (80-pin) devices.
6: AVDD must be connected to a positive supply and AVSS must be connected to a ground reference for
proper operation of the part in user or ICSP modes. See parameter D001A for details.
 2004 Microchip Technology Inc.
DS39609B-page 15