JA80386EXTC25 Datasheet, PDF (29/56 Pages) Intel Corporation – Intel386™ EX Embedded Microprocessor

Intel386™ EX Embedded Microprocessor
Table 10. 3-Volt DC Characteristics
Symbol
Parameter
Min.
Max. Unit
Test Condition
V_IL
V_IH
V_ILC
V_IHC
V_OL
V_OH
V_OLC
V_OHC
I_LI
I_LO
I_CC
I_IDLE
I_PD
C_S
Input Low Voltage for all
input pins except CLK2,
TRST#, RESET, SMI#, and
–0.3
0.8
V
NMI
Input High Voltage for all
input pins except CLK2,
TRST#, RESET, SMI#, and
2.0
NMI
V_CC + 0.3 V
Input Low Voltage for CLK2,
TRST#, RESET, SMI#, and -0.3
0.8
V
NMI
Input High Voltage for CLK2,
TRST#, RESET, SMI#, and V_CC-0.6 V_CC+0.3 V
NMI
Output Low Voltage
All pins except Port 3
Port 3 pins (2 max)
Output High Voltage
All pins except Port 3
Port 3
CLKOUT
0.20
0.45
0.45
V_CC-0.2
V_CC-0.65
V_CC-0.65
0.2
0.45
V ^IOL ^{= 100 µA, 2.7 V ≤ V}CC ^{≤ 3.6 V}
(LVCMOS)
V
V
I_OL = 4mA, 3.0 V≤V_CC≤3.6 V (LVTTL)
I_OL = 8mA, 3.0 V≤V_CC≤3.6 V (LVTTL)
V I_OH= -100 µA, 2.7 V≤V_CC≤3.6 V
(LVCMOS)
V I_OH= -4mA, 3.0 V≤V_CC≤3.6V (LVTTL)
V I_OH= -8mA, 3.0 V≤V_CC≤3.6V (LVTTL)
I_OL = 100 µA, 2.7 V ≤ V_CC ≤ 3.6 V
V I_OL = 1 mA, 3.0 V ≤ V_CC ≤ 3.6 V
(LVTTL)
CLKOUT
V_CC-0.2
V_CC-0.65
I_OH = -100 µA, 2.7 V ≤ V_CC ≤ 3.6 V
V I_OH = -1 mA, 3.0 V ≤ V_CC ≤ 3.6 V
(LVTTL)
Input Leakage Current
Output Leakage Current
Supply Current
±5
µA
0 ≤ V_IN ≤ V_CC
FLT# is not tested for I_LI
±15
µA 0.45V ≤ V_OUT ≤ V_CC
140
mA F_OSC = 25 MHz, V_CC=3.6 V
110
mA F_OSC = 20 MHz, V_CC=3.6 V
(tested with device held in reset,
inputs held in their inactive state)
Idle Mode Current
Powerdown Current
50
mA F_OSC = 25 MHz, VCC=3.6 V
40
mA F_OSC = 20 MHz, VCC=3.6 V
100
µA
Pin Capacitance (any pin to
V_SS)
10
pF Not tested
Datasheet
29