X6800 Datasheet, PDF (25/122 Pages) Intel Corporation – Core2 Extreme Processor

Electrical Specifications
Figure 2. V_CC Static and Transient Tolerance for Processors with 2 MB L2 Cache
2.6.3
Table 8.
0
VID - 0.000
VID - 0.013
VID - 0.025
VID - 0.038
VID - 0.050
VID - 0.063
VID - 0.075
VID - 0.088
VID - 0.100
VID - 0.113
VID - 0.125
VID - 0.138
VID - 0.150
VID - 0.163
VID - 0.175
Icc [A]
10
20
30
40
50
60
70
Vcc Maximum
Vcc Typical
Vcc Minimum
NOTES:
1.
The loadline specification includes both static and transient limits except for overshoot
allowed as shown in Section 2.6.3.
2.
This loadline specification shows the deviation from the VID set point.
3.
The loadlines specify voltage limits at the die measured at the VCC_SENSE and
VSS_SENSE lands. Voltage regulation feedback for voltage regulator circuits must be taken
from processor VCC and VSS lands. Refer to the Voltage Regulator-Down (VRD) 11.0
Processor Power Delivery Design Guidelines For Desktop LGA775 Socket for socket loadline
guidelines and VR implementation details.
V_CC Overshoot
The processor can tolerate short transient overshoot events where V_CC exceeds the VID
voltage when transitioning from a high to low current load condition. This overshoot
cannot exceed VID + V_{OS_MAX} (V_{OS_MAX} is the maximum allowable overshoot voltage).
The time duration of the overshoot event must not exceed T_{OS_MAX} (T_{OS_MAX} is the
maximum allowable time duration above VID). These specifications apply to the
processor die voltage as measured across the VCC_SENSE and VSS_SENSE lands.
V_CC Overshoot Specifications
Symbol
Parameter
Min Max Unit Figure Notes
V_{OS_MAX} Magnitude of V_CC overshoot above VID
—
50 mV 3
1
T_{OS_MAX} Time duration of V_CC overshoot above VID
—
25
μs 3
1
NOTES:
1.
Adherence to these specifications is required to ensure reliable processor operation.
Datasheet
25