HYB25D256800CT Datasheet, PDF (74/94 Pages) Infineon Technologies AG – 256 Mbit Double Data Rate SDRAM

HYB25D256[16/40/80]0C[E/C/F/T](L)
256 Mbit Double-Data-Rate SDRAM
Electrical Characteristics
Table 23 I_DD Conditions
Parameter
Symbol
Operating Current: one bank; active/ precharge; t_RC = t_RCMIN; t_CK = t_CKMIN;
DQ, DM, and DQS inputs changing once per clock cycle; address and control inputs changing once
every two clock cycles.
I_DD0
Operating Current: one bank; active/read/precharge; Burst = 4;
I_DD1
Refer to the following page for detailed test conditions.
Precharge Power-Down Standby Current: all banks idle; power-down mode; CKE ≤ V_ILMAX; t_CK =
t_CKMIN
Precharge Floating Standby Current: CS ≥ V_IHMIN, all banks idle;
CKE ≥ V_IHMIN; t_CK = t_CKMIN, address and other control inputs changing once per clock cycle, V_IN = V_REF
for DQ, DQS and DM.
I_DD2P
I_DD2F
Precharge Quiet Standby Current:
CS ≥ V_IHMIN, all banks idle; CKE ≥ V_IHMIN; t_CK = t_CKMIN, address and other control inputs stable
at ≥ V_IHMIN or ≤ V_ILMAX; V_IN = V_REF for DQ, DQS and DM.
Active Power-Down Standby Current: one bank active; power-down mode;
CKE ≤ V_ILMAX; t_CK = t_CKMIN; V_IN = V_REF for DQ, DQS and DM.
Active Standby Current: one bank active; CS ≥ V_IHMIN; CKE ≥ V_IHMIN; t_RC = t_RASMAX; t_CK = t_CKMIN;
DQ, DM and DQS inputs changing twice per clock cycle; address and control inputs changing once per
clock cycle.
I_DD2Q
I_DD3P
I_DD3N
Operating Current: one bank active; Burst = 2; reads; continuous burst; address and control inputs
changing once per clock cycle; 50% of data outputs changing on every clock edge; CL = 2 for DDR200
and DDR266A, CL = 3 for DDR333; t_CK = t_CKMIN; I_OUT = 0 mA
Operating Current: one bank active; Burst = 2; writes; continuous burst; address and control inputs
changing once per clock cycle; 50% of data outputs changing on every clock edge; CL = 2 for DDR200
and DDR266A, CL = 3 for DDR333; t_CK = t_CKMIN
Auto-Refresh Current: t_RC = t_RFCMIN, burst refresh
Self-Refresh Current: CKE ≤ 0.2 V; external clock on; t_CK = t_CKMIN
Operating Current: four bank; four bank interleaving with BL = 4; Refer to the following page for
detailed test conditions.
I_DD4R
I_DD4W
I_DD5
I_DD6
I_DD7
Data Sheet
74
Rev. 1.6, 2004-12