TLE6266G Datasheet, PDF (37/50 Pages) Infineon Technologies AG – System Basis Chip

Target Datasheet TLE 6266
8.3 Electrical Characteristics (cont’d)
9 V < V_S < 16 V; I_CC = -100 mA; normal mode; all outputs open; – 40 °C < T_j < 150 °C; CAN-
transceiver circuitry: – 40 °C < T_j < 125 °C; all voltages with respect to ground; positive current
defined flowing into pin; unless otherwise specified.
Parameter
Symbol Limit Values Unit Test Condition
min. typ. max.
Propagation delay
TxD-to-RxD HIGH
(dominanat to recessive)
t_PD(H)
–
–
1.2 2.0 µs ^C1 ^{= 100 pF;}
C₂ = 0; R₁ =100 W; no
failures and bus failure
cases 1, 2, 3a and 4
2.5 3.5 µs ^C1 ^{= C}2 ^{= 3.3 nF;}
R₁ = 100 W; no bus
failure and failure
cases 1, 2, 3a and 4
Minimum hold time to go
sleep command
–
–
t_h(min) 15
1.0 2.1 µs ^C1 ^{100 pF; C}2 ^{= 0;}
R₁ = 100 W; bus failure
cases 3, 5, 6, 6a and 7
1.5 2.6 µs ^C1 ^{= C}2 ^{= 3.3 nF;}
R₁ = 100 W; bus failure
cases 3, 5, 6, 6a and 7
25 50 µs
Edge-count difference
n_e
(falling edge) between CANH
and CANL for failure cases 1,
2, 3a and 4 detection
–
4
–
–
normal operating
mode
Edge-count difference (rising
edge) between CANH and
CANL for failure cases 1, 2,
3a and 4 recovery
–
2
–
–
TxD permanent dominant t_TxD
disable time
1.0 2.0 3.5 ms ^{normal mode}
Version 1.06
38
2002-11-26