|
TLE6266G Datasheet, PDF (34/50 Pages) Infineon Technologies AG – System Basis Chip | |||
|
◁ |
Target Datasheet TLE 6266
8.3 Electrical Characteristics (contâd)
9 V < VS < 16 V; ICC = -100 mA; normal mode; all outputs open; â 40 °C < Tj < 150 °C; CAN-
transceiver circuitry: â 40 °C < Tj < 125 °C; all voltages with respect to ground; positive current
defined flowing into pin; unless otherwise specified.
Parameter
Symbol Limit Values Unit Test Condition
min. typ. max.
CANL dominant output
voltage
VCANL,d â
1.0 1.4 V
TxD = 0 V;
ICANL = 40 mA
CANH output current
CANL output current
ICANH
ICANL
Voltage detection threshold Vdet(th)
for short-circuit to battery
voltage on CANH and CANL
â 110 â 80 â 50 mA
â5 0
5
mA
50 80 110 mA
â5 0
5
mA
6.5 7.3 8.0 V
VCANH = 0 V;
TxD = 0 V
cycl. wake mode;
VCANH = 12 V
VCANL = 5 V;
TxD = 0 V
cycl. wake mode;
VCANL = 0 V;
VS = 12 V
Voltage detection threshold
for short-circuit to battery
voltage on CANH
Vdet(th)
VBAT VBAT VBAT V
â 2.5 â 2 â 1
stand-by/
cycl. wake mode
CANH wake-up voltage
threshold
VCANH,w 1.2 1.9 2.7 V
u
CANL wake-up voltage
threshold
VCANL,w 2.2 3.1 3.9 V
u
Wake-up voltage threshold DVwu 0.2 â
â
V
hysteresis
DVwu = VCANL,wu â
VCANH,wu
CANH single-ended receiver VCANH 1.6 2.1 2.6 V
threshold
failure cases 3, 5 and
7
CANL single-ended receiver VCANL 2.4 2.9 3.4 V
threshold
failure case 6 and 6a
CANL leakage current
CANH leakage current
ICANL,lk â 5 0
5
mA VCC = 0 V; VS = 0 V;
VCANL = 12 V;
Tj < 85 °C
ICANH,lk â 5 0
5
mA VCC = 0 V; VS = 0 V;
VCANH = 5 V;
Tj < 85 °C
Version 1.06
35
2002-11-26
|
▷ |