TC1797_14 Datasheet, PDF (133/192 Pages) Infineon Technologies AG – 32-Bit Single-Chip Microcontroller

TC1797
Electrical Parameters
5.1.3 Absolute Maximum Ratings
Stresses above those listed under “Absolute Maximum Ratings” may cause permanent
damage to the device. This is a stress rating only and functional operation of the device
at these or any other conditions above those indicated in the operational sections of this
specification is not implied. Exposure to absolute maximum rating conditions for
extended periods may affect device reliability.
During absolute maximum rating overload conditions (V_IN > related V_DD or V_IN < V_SS) the
voltage on the related V_DD pins with respect to ground (V_SS) must not exceed the values
defined by the absolute maximum ratings.
Table 7
Absolute Maximum Rating Parameters
Parameter
Symbol
Values
Min. Typ. Max.
Unit Note /
Test Con
dition
Ambient temperature
T_A SR -40 –
Storage temperature
T_ST SR -65 –
Junction temperature
T_J SR -40 –
Voltage at 1.5 V power supply V_DD
––
pins with respect to V_SS1)
SR
Voltage at 3.3 V power supply V_DDEBU – –
pins with respect to V_SS2)
V_DDP SR
Voltage at 5 V power supply V_DDM SR – –
pins with respect to V_SS
Voltage on any Class A input V_IN SR -0.5 –
pin and dedicated input pins
with respect to V_SS
Voltage on any Class B input V_IN SR -0.5 –
pin with respect to V_SS
Voltage on any Class D
V_AIN
-0.5 –
analog input pin with respect V_AREFx
to V_AGND
SR
Voltage on any shared Class V_AINF
-0.5 –
D analog input pin with
V_FAREF
respect to V_SSAF, if the FADC
SR
is switched through to the pin.
125
°C Under bias
150
°C –
150
°C Under bias
2.25
V–
3.75
V–
5.5
V–
V_DDP + 0.5 V
or max. 3.7
Whatever
is lower
V_DDEBU + 0.5 V
or max. 3.7
V_DDM + 0.5 V
Whatever
is lower
–
V_DDM + 0.5 V –
CPU Frequency
f_CPU SR – – 180
150
MHz Derivative
dependent
Data Sheet
129
V1.3, 2014-08