IC-MU_17 Datasheet, PDF (7/66 Pages) IC-Haus GmbH – MAGNETIC OFF-AXIS POSITION ENCODER - POLE WIDTH 1.28MM

iC-MU MAGNETIC OFF-AXIS
POSITION ENCODER - POLE WIDTH 1.28MM
Rev D1, Page 7/66
ABSOLUTE MAXIMUM RATINGS
Maximum ratings do not constitute permissible operating conditions; functionality is not guaranteed. Exceeding the maximum ratings can
damage the device
Item Symbol Parameter
No.
Conditions
Min.
Unit
Max.
G001 V()
Voltage at VPA, VPD
-0.3
6
V
G002 I()
Current in VPA
-10
20
mA
G003 I()
Current in VPD
-10
100
mA
G004 V()
Voltage at all pins except VPD
-0.3 VPD+0.3 V
G005 I()
Current in all I/O pins
DC current
Pulse width < 10 µs
-10
10
mA
-100
100
mA
G006 Vd()
ESD Susceptibility at all pins
HBM, 100 pF discharged through 1.5 kΩ
2
kV
G007 Ptot
Permissible Power Dissipation
400
mW
G008 Tj
Chip-Temperature
-40
150
°C
G009 Ts
Storage Temperature Range
-40
150
°C
THERMAL DATA
Operating conditions: VPA = VPD = 5 V ±10%
Item Symbol Parameter
No.
Conditions
T01 Ta
Operating Ambient Temperature Range
T02 Rthja
Thermal Resistance Chip to Ambient Surface mounted, Thermal-Pad soldered to
DFN16
approx. 2 cm² copper area on the PCB
Unit
Min. Typ. Max.
-40
110 °C
40
K/W
All voltages are referenced to ground (pin VND = VNA) unless otherwise stated.
All currents flowing into the device pins are positive; all currents flowing out of the device pins are negative.