IC-MU_17 Datasheet, PDF (19/66 Pages) IC-Haus GmbH – MAGNETIC OFF-AXIS POSITION ENCODER - POLE WIDTH 1.28MM

iC-MU MAGNETIC OFF-AXIS
POSITION ENCODER - POLE WIDTH 1.28MM
Special BiSS registers
For further information on parameters, see
BiSS Interface Protocol Description (C Mode)
www.ichaus.de/product/iC-MU.
DEV_ID(7:0)
Addr. 0x38; bit 7:0
Addr. SER:0x78; bit 7:0
DEV_ID(15:8)
Addr. 0x39; bit 7:0
Addr. SER:0x79; bit 7:0
DEV_ID(23:16)
Addr. 0x3A; bit 7:0
Addr. SER:0x7A; bit 7:0
DEV_ID(31:24)
Addr. 0x3B; bit 7:0
Addr. SER:0x7B; bit 7:0
DEV_ID(39:32)
Addr. 0x3C; bit 7:0
Addr. SER:0x7C; bit 7:0
DEV_ID(47:40)
Addr. 0x3D; bit 7:0
Addr. SER:0x7D; bit 7:0
Code
Description
0x000000000000
...
DEV_ID
0xFFFFFFFFFFFF
Table 9: Device ID
MFG_ID(7:0)
Addr. 0x3E; bit 7:0
Addr. SER:0x7E; bit 7:0
MFG_ID(15:8)
Addr. 0x3F; bit 7:0
Addr. SER:0x7F; bit 7:0
Code
Description
0x0000
...
MFG_ID
0xFFFF
Table 10: BiSS Manufacturer ID
Rev D1, Page 19/66
EDSBANK(7:0)
Addr. 0x31; bit 7:0
EDSBANK(7:0)
Addr. SER:0x41; bit 7:0
Code
Description
0x00
no EDS
0x01
...
EDSBANK pointer to first EDS bank
0xFE
0xFF
no EDS
Note:
recommended value 0x02, in this case an additional
sensor like iC-PVL can use BANK 1 for configuration
Table 11: EDSBANK: Start of EDS-part
PROFILE_ID(7:0) Addr. 0x32; bit 7:0
Addr. SER:0x42; bit 7:0
PROFILE_ID(15:8) Addr. 0x33; bit 7:0
Addr. SER:0x43; bit 7:0
Code
Description
0x0000
...
PROFILE_ID
0xFFFF
Table 12: Profile ID
SERIAL(7:0)
Addr. 0x34; bit 7:0
Addr. SER:0x44; bit 7:0
SERIAL(15:8)
Addr. 0x35; bit 7:0
Addr. SER:0x45; bit 7:0
SERIAL(23:16)
Addr. 0x36; bit 7:0
Addr. SER:0x46; bit 7:0
SERIAL(31:24)
Addr. 0x37; bit 7:0
Addr. SER:0x47; bit 7:0
Code
Description
0x00000000
...
SERIAL
0xFFFFFFFF
Table 13: Serial number