IC-MHM Datasheet, PDF (56/63 Pages) IC-Haus GmbH – 14-BIT ABSOLUTE ANGLE HALL ENCODER

iC-MHM
14-BIT ABSOLUTE ANGLE HALL ENCODER
Rev D1, Page 56/63
set position of zero is used and the new position offset
is only stored in RAM.
For example, many stand-alone applications use a pre-
set position of zero so that a preset instruction or the
enabled preset input P1 is effectively a zero instruc-
tion or input. In this case, initiating a position preset
sequence causes the current actual position to be the
zero position.
A flowchart of the position preset sequence is shown in
Figure 43 in the STARTUP AND OPERATION section.