MC68HC05K0 Datasheet, PDF (89/154 Pages) Freescale Semiconductor, Inc – HCMOS Microcontroller Unit

Freescale Semiconductor, Inc.
Personality EPROM (MC68HC05K1 Only)
PEPROM Registers
9.3.2 PEPROM Status and Control Register
The PEPROM status and control register (PESCR), shown in
Figure 9-3, controls the PEPROM programming voltage. This register
also transfers the PEPROM bits to the internal data bus and contains a
row zero flag.
Address: $000F
Bit 7
6
5
4
3
2
1
Bit 0
Read: PEDATA 0
0
0
0
0 PEPRZF
PEPGM
Write:
Reset: U
0
0
0
0
0
0
1
= Unimplemented U = Unaffected
Figure 9-3. PEPROM Status and Control Register (PESCR)
PEDATA — PEPROM Data Bit
This read-only bit is the state of the PEPROM sense amplifier and
shows the state of the currently selected bit. Reset does not affect the
PEDATA bit.
1 = PEPROM data logic 1
0 = PEPROM data logic 0
PEPGM — PEPROM Program Control Bit
This read/write bit controls the switches that apply the programming
voltage, V_PP, to the selected PEPROM cell. Reset clears PEPGM.
1 = Programming voltage applied
0 = Programming voltage not applied
PEPRZF — PEPROM Row Zero Flag
This read-only bit is set when the PEPROM bit select register selects
the first row (row zero) of the PEPROM array. Selecting any other row
clears PEPRZF. Monitoring PEPRZF can reduce the code needed to
access one byte of PEPROM. Reset sets PEPRZF.
1 = Row zero selected
0 = Row zero not selected
MC68HC05K0 • MC68HC05K1 — Rev. 2.0
Personality EPROM (MC68HC05K1 Only)
For More Information On This Product,
Go to: www.freescale.com
Technical Data