MC68HC05K0 Datasheet, PDF (132/154 Pages) Freescale Semiconductor, Inc – HCMOS Microcontroller Unit

Technical Data
Freescale Semiconductor, Inc.
13.4.2 EPROMs
If submitting the application program in an EPROM, clearly label the
EPROM with this information:
• Customer name
• Customer part number
• Checksum
• Project or product name
• Date
NOTE:
Begin the application program at the first user ROM location. Program
addresses must correspond exactly to the available on-chip user ROM
addresses as shown in the memory map. Write $00 in all non-user ROM
locations. See the current MCU ordering form for additional
requirements.
Submit the application program in one EPROM large enough to contain
the entire memory map. If the memory map has two user ROM areas
with the same addresses, then write the two areas on separate
EPROMs. Label the EPROMs with the addresses they contain.
Pack EPROMs securely in a conductive IC carrier for shipment. Do not
use Styrofoam^®1.
13.5 ROM Program Verification
The primary use for the on-chip ROM is to hold the customer’s
application program. The customer develops and debugs the application
program and then submits the MCU order along with the application
program.
Motorola inputs the customer’s application program code into a
computer program that generates a listing verify file. The listing verify file
represents the memory map of the MCU. The listing verify file contains
the user ROM code and may also contain non-user ROM code, such as
Technical Data
1. Styrofoam is a registered trademark of The Dow Chemical Company.
MC68HC05K0 • MC68HC05K1 — Rev. 2.0
Ordering Information
For More Information On This Product,
Go to: www.freescale.com