PXD20 Datasheet, PDF (75/130 Pages) Freescale Semiconductor, Inc – PXD20 Microcontroller

Electrical characteristics
6 _{Flash in Low Power. RCOSC 128 kHz and RCOSC 16 MHz ON. 10 MHz XTAL clock. FlexCAN: instances: 0, 1ON (clocked}
but no reception or transmission), LINFLEX: instances 0, 1, 2 ON (clocked but no reception or transmission). eMIOS: instance:
0, 1 ON - 16 channels on with PWM20K Hz. DSPI: instance: 0 (clocked but no communication). DCUs, TCON, VIU, GPU clock
gated, RTC/API ON.PIT ON. STM ON. ADC ON but not converting.
7 _{No clock, RC 16MHz off, RCI 128 kHz on, PLL off, HPvreg off, ULPVreg/LPVreg on. All possible peripherals off and clock}
gated. Flash in power down mode.
8 _{ULPreg ON, HP/LPVreg off, 64 KB RAM on, device configured for minimum consumption, all possible modules switched off.}
9 _{32 KHz oscillator operates at 32,768 Hz.}
10 _{ULPreg ON, HP/LPVreg off, 8 KB RAM on, device configured for minimum consumption, all possible modules switched off.}
4.8 DC electrical specifications
4.8.1 DC specification for CMOS090LP2 library @ VDDE = 3.3 V
NOTE
These pad specifications are applicable for pads in the Digital segment Only. See the
“GPIO power bank supplies and functionality” table in the “Voltage Regulators and Power
Supplies” chapter of the reference manual for details.
Table 21. DC electrical specifications
Symbol
C
Parameter
Condition
Value
Min
Max
Unit SpecID
Vdd SR P Core supply voltage
—
1.08
1.47
V
Vdde SR P I/O supply voltage
—
3.0
3.6
V
Vdd33 SR P I/O pre-driver supply voltage
—
3.0
3.6
V
Vih_c
SR P CMOS input buffer high
voltage
With hysteresis enabled 0.65  Vdde Vdde + 0.3 V
With hysteresis disabled 0.55  Vdde Vdde + 0.3
Vil_c
SR P CMOS input buffer low
voltage
With hysteresis enabled Vss – 0.3 0.35  Vdde V
With hysteresis disabled Vss – 0.3 0.40  Vdde
Vhys_c SR T CMOS input buffer hysteresis
—
0.1  Vdde
—
V
Vih_fod_h SR P 5 V tolerant CMOS input
buffer high voltage
With hysteresis enabled 0.65  Vdd33 Vdd33 + 0.3 V
Vil_fod_h SR P 5 V tolerant CMOS input
buffer low voltage
With hysteresis enabled Vss – 0.3 0.35  Vdd33 V
Iact_s SR T Selectable weak
—
25
150
A
pullup/pulldown current
Iinact_d SR P Digital pad input leakage
current
Weak pull inactive
–2.5
2.5
A
Iinact_a SR P Analog pad input leakage Weak pull inactive
current
–150
150
A
Voh SR P Output high voltage
—
0.8  Vdde
—
V
D9.1
D9.2
D9.3
D9.4
D9.5
D9.6
D9.7
D9.8
D9.9
D9.10
D9.11
D9.12
PXD20 Microcontroller Data Sheet, Rev. 2
Freescale Semiconductor
Preliminary—Subject to Change Without Notice
75