|
S9S12G128F0MLH Datasheet, PDF (495/1292 Pages) Freescale Semiconductor, Inc – S12 CPU core, Up to 240 Kbyte on-chip flash with ECC | |||
|
◁ |
14.1.2 Modes of Operation
Analog-to-Digital Converter (ADC12B12CV2)
14.1.2.1 Conversion Modes
There is software programmable selection between performing single or continuous conversion on a
single channel or multiple channels.
14.1.2.2 MCU Operating Modes
⢠Stop Mode
Entering Stop Mode aborts any conversion sequence in progress and if a sequence was aborted
restarts it after exiting stop mode. This has the same effect/consequences as starting a conversion
sequence with write to ATDCTL5. So after exiting from stop mode with a previously aborted
sequence all ï¬ags are cleared etc.
⢠Wait Mode
ADC12B12C behaves same in Run and Wait Mode. For reduced power consumption continuous
conversions should be aborted before entering Wait mode.
⢠Freeze Mode
In Freeze Mode the ADC12B12C will either continue or ï¬nish or stop converting according to the
FRZ1 and FRZ0 bits. This is useful for debugging and emulation.
MC9S12G Family Reference Manual, Rev.1.23
Freescale Semiconductor
497
|
▷ |