MC912D60AVPVE8 Datasheet, PDF (240/460 Pages) Freescale Semiconductor, Inc – HC12 Microcontrollers

Enhanced Capture Timer
RDPT — Timer Port Drive Reduction
This bit reduces the effective output driver size which can reduce
power supply current and generated noise depending upon pin
loading.
0 = Normal output drive capability
1 = Enable output drive reduction function
TCRE — Timer Counter Reset Enable
This bit allows the timer counter to be reset by a successful output
compare 7 event. This mode of operation is similar to an up-counting
modulus counter.
0 = Counter reset inhibited and counter free runs
1 = Counter reset by a successful output compare 7
If TC7 = $0000 and TCRE = 1, TCNT will stay at $0000 continuously.
If TC7 = $FFFF and TCRE = 1, TOF will never be set when TCNT is
reset from $FFFF to $0000.
PR2, PR1, PR0 — Timer Prescaler Select
These three bits specify the number of ÷2 stages that are to be
inserted between the module clock and the main timer counter.
Table 14-3. Prescaler Selection
PR2
PR1
PR0
Prescale
Factor
0
0
0
1
0
0
1
2
0
1
0
4
0
1
1
8
1
0
0
16
1
0
1
32
1
1
0
64
1
1
1
128
The newly selected prescale factor will not take effect until the next
synchronized edge where all prescale counter stages equal zero.
Technical Data
240
Enhanced Capture Timer
MC68HC912D60A — Rev. 3.1
Freescale Semiconductor