ES29LV160F Datasheet, PDF (5/71 Pages) Excel Semiconductor Inc. – 16 Megabit (2 M x 8-Bit/1 M x 16-Bit) CMOS 3.0 Volt-only Boot Sector Flash Memory

ES29LV160F
Excel Semiconductor Inc.
The hardware RESET# pin terminates any operation in progress and resets the internal state
machine to reading array data. The RESET# pin may be tied to the system reset circuitry. A
system reset would thus also reset the device, enabling the system microprocessor to read the
boot-up firmware from the Flash memory.
The device offers two power-saving features. When addresses have been stable for a specified
amount of time, the device enters the automatic sleep mode. The system can also place the
device into the standby mode. Power consumption is greatly reduced in both these modes.
ESI’s Flash technology combines years of Flash memory manufacturing experience to produce the
highest levels of quality, reliability and cost effectiveness. The device electrically erases all bits
within a sector simultaneously via Fowler-Nordheim tunneling. The data is programmed using hot
electron injection.
1. Product Selector Guide
Family Part Number
Speed Option
Voltage Range ( Vcc )
Max access time, ns (t_ACC )
Max CE# access time, ns (t_CE )
Max OE# access time, ns (t_OE )
Note
See AC Characteristics on page 45 for full specifications.
ES29LV160F
55R
70
3.0 ~3.6V
2.7 ~3.6V
55
70
55
70
25
30
Rev.0A (Dec 12, 2007) 5