MC3610 Datasheet, PDF (45/67 Pages) List of Unclassifed Manufacturers – Axis Accelerometer

MC3610 3-Axis Accelerometer
Preliminary Datasheet
8.11 (0x14) IO Control Register
Enabling the SPI_MODE_EN bit disables any possible I2C communications. For correct SPI
operation, this bit must be set to ‘1’ before any active sampling is enabled. Otherwise, sample
data will not be written to the XOUT, YOUT and ZOUT output registers.
Addr
0x14
Name
IO_C
Bit
POR Value R/W
7
6
5
4
3
2
1
0
SPI_MODE_EN RESV RESV RESV RESV RESV RESV RESV 00000000 RW
Bit
Name
6:0 RESV
7
SPI_MODE_EN
Description
Reserved
0: Device interface is still defined as it was at power-up
but no data will appear in XOUT, YOUT and ZOUT
registers if both this bit and I2C_MODE_EN are set to 0
(default).
1: Disables any I2C communications.
mCube Proprietary.
APS-048-0042v1.6
© 2015 mCube Inc. All rights reserved.
45 / 67