MC3610 Datasheet, PDF (26/67 Pages) List of Unclassifed Manufacturers – Axis Accelerometer

MC3610 3-Axis Accelerometer
Preliminary Datasheet
Internally, the registers which are used to store samples are clocked by the sample clock gated
by I2C activity. Therefore, in order to allow the device to collect and present samples in the
sample registers at least one I2C STOP condition must be present between samples.
Refer to the I2C specification for a detailed discussion of the protocol. Per I2C requirements,
when the I2C interface is enabled, DIN_SDA is an open drain, bi-directional pin. Pins
SCK_SCL and DIN_SDA each require an external pull-up resistor, typically 4.7kΩ.
mCube Proprietary.
APS-048-0042v1.6
© 2015 mCube Inc. All rights reserved.
26 / 67