MC3610 Datasheet, PDF (22/67 Pages) List of Unclassifed Manufacturers – Axis Accelerometer

MC3610 3-Axis Accelerometer
Preliminary Datasheet
5.6 Mode State Machine Flow
Figure 11. Mode Operational Flow shows the operational mode flow for the device. The device
defaults to SLEEP mode following power-on. Mode transitions occur at an approximate rate of
~500Hz. Depending on the operation, the MODE State Machine may trigger events that auto-
clear or set the MCTRL[2:0] bits in register 0x10 after a particular command is chosen.
For details on the Sniff Setup Steps, refer to the ENTER SNIFF API in the Programming
Guide.
For details on the Sniff Cleanup Steps, refer to the Interrupt Handler in the Programming
Guide.
Run Sniff
Setup Steps
Standby
SNIFF
SLEEP
Standby
Sleep
Sniff
STANDBY
Loop until Count
= TrigCount
Capture Samples
using standby clock,
R12[7:5]
Trig
CWake
TRIG
ODR taken
from R11
Standby
CWAKE
N
Y
Activity?
Figure 11. Mode Operational Flow
Run Sniff
Cleanup Steps
mCube Proprietary.
APS-048-0042v1.6
© 2015 mCube Inc. All rights reserved.
22 / 67