MC3610 Datasheet, PDF (17/67 Pages) List of Unclassifed Manufacturers – Axis Accelerometer

MC3610 3-Axis Accelerometer
Preliminary Datasheet
4.3.2 ELECTRICAL CHARACTERISTICS
Parameter
LOW level input voltage
HIGH level input voltage
Hysteresis of Schmitt trigger inputs
Output voltage, pin INTN, Iol ≤ 2 mA
Output voltage, pin DIN_SDA (open drain),
Iol ≤ 1 mA
Input current, pins DIN_SDA and SCK_SCL
(input voltage between 0.1*VDD and 0.9*VDD
max)
Capacitance, pins DIN_SDA and SCK_SCL ⁴
Table 6. Electrical Characteristics – Interface
Symbol
VIL
VIH
Vhys
Vol
Voh
Vols
Ii
Ci
Min
-0.5
0.7*VDD
0.05*VDD
0
0
-
-10
-
Max
0.3*VDD
-
-
0.4
0.9*VDD
0.1*VDD
Unit
V
V
V
V
V
V
10
µA
10
pF
NOTES:
 If multiple slaves are connected to the I2C signals in addition to this device, only 1 pull-
up resistor on each of SDA and SCL should exist. Also, care must be taken to not
violate the I2C specification for capacitive loading.
 When pin VDDIO is not powered and set to 0V, INTN, DIN_SDA and SCK_SCL will be
held to VDDIO plus the forward voltage of the internal static protection diodes, typically
about 0.6V.
 When pin VDDIO is disconnected from power or ground (e.g. Hi-Z), the device may
become inadvertently powered up through the ESD diodes present on other powered
signals.
4 _{Values are based on device characterization, not tested in production.}
mCube Proprietary.
APS-048-0042v1.6
© 2015 mCube Inc. All rights reserved.
17 / 67