MC3610 Datasheet, PDF (1/67 Pages) List of Unclassifed Manufacturers – Axis Accelerometer

MC3610 3-Axis Accelerometer
Preliminary Datasheet
GENERAL DESCRIPTION
The MC3610 is an ultra-low power, low-
noise, integrated digital output 3-axis
accelerometer with a feature set optimized
for wearables and consumer product
motion sensing. Applications include
wearable consumer products, IoT devices,
user interface control, gaming motion input,
electronic compass tilt compensation for
cell phones, game controllers, remote
controls and portable media products.
Low noise and low power are inherent in
the monolithic fabrication approach, where
the MEMS accelerometer is integrated in a
single-chip with the electronics integrated
circuit.
FEATURES
Range, Sampling & Power
 ±2,4,8,12 or 16g ranges
 8, 10 or 12-bit resolution with FIFO
o 14-bit single samples
 14 - 370 samples/sec
 Ultra-Low Power with FIFO
o 0.6 μA typical sniff current
o 5 μA typical current @ 50Hz
o 14 μA @ 370Hz
Simple System Integration
 I2C interface, up to 400 kHz
 SPI Interface, up to 2 MHz
 2 × 2 × 0.94 mm 12-pin package
 Single-chip 3D silicon MEMS
 Low noise to 2.3mgRMS @ 53Hz
In the MC3610 the internal sample rate can
be set from 14 to 370 samples / second.
Specific tap or sample acquisition
conditions can trigger an interrupt to a
remote MCU. Alternatively, the device
supports the reading of sample and event
status via polling.
mCube Proprietary.
APS-048-0042v1.6
© 2015 mCube Inc. All rights reserved.
1 / 67