MC3610 Datasheet, PDF (41/67 Pages) List of Unclassifed Manufacturers – Axis Accelerometer

MC3610 3-Axis Accelerometer
Preliminary Datasheet
3
RESV
Reserved
4
X_AXIS_PD 0: X-axis is enabled.
1: X-axis is disabled.
5
Y_AXIS_PD 0: Y-axis is enabled.
1: Y-axis is disabled.
6
Z_AXIS_PD 0: Z-axis is enabled.
1: Z-axis is disabled.
7
TRIG
Setting this bit will execute the trigger mode where 1 to 255
samples are acquired. The number of samples is specified by
the TRIG_COUNT in register 0x29. The starting mode for TRIG
mode must be STANDBY. Once the number of samples is
complete, the device will return to STANDBY mode.
Table 18. Mode Control Register Settings
mCube Proprietary.
APS-048-0042v1.6
© 2015 mCube Inc. All rights reserved.
41 / 67