MC3610 Datasheet, PDF (37/67 Pages) List of Unclassifed Manufacturers – Axis Accelerometer

MC3610 3-Axis Accelerometer
Preliminary Datasheet
8.5 (0x08) Status Register 1
This register reports the operational mode of the device. Note that the lower 3-bits, the
MODE[2:0] field, do not immediately change once a command is written to the MODE register,
but may take up to 3 transitions of the heartbeat clock.
Bit
Addr
Name
POR
Value
R/W
7
6
5
4
3
2
1
0
0x08
STATUS_1
INT_PEND
FIFO_
THRESH
FIFO_FULL
FIFO_
EMPTY
NEW_
DATA
MODE[2] MODE[1] MODE[0] 00000000 RO
Bit
Name
Description
2:0
MODE[2:0]
Decode
Mode
Comments
000
SLEEP
Lowest power mode,
regulators on, no clock
activity, partial chip power-
down.
001
STANDBY
Low power mode, no
(SLEEP)
sampling, clocks active.
(Device may show
STANDBY mode as it
transitions from STANDBY
to SLEEP).
010
SNIFF
Sniff activity detection mode,
sniff enabled, no sampling,
no FIFO operations,
automatically transition to
CWAKE mode upon activity
detection.
011
RESV
Reserved
100
RESV
Reserved
101
CWAKE
Continuous wake, use entire
sampling period to run ADC.
110
Reserved
Reserved
mCube Proprietary.
APS-048-0042v1.6
© 2015 mCube Inc. All rights reserved.
37 / 67