LM3S2016 Datasheet, PDF (423/468 Pages) List of Unclassifed Manufacturers – Microcontroller

LM3S2016 Microcontroller
Pin Number
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
Pin Name
PC3
TDO
SWO
PC2
TDI
PC1
TMS
SWDIO
PC0
TCK
SWCLK
VDD
GND
NC
NC
NC
NC
GND
VDD25
PB7
TRST
PB6
PB5
PB4
VDD
GND
PD4
PD5
GNDA
98
VDDA
99
NC
100
NC
Pin Type
I/O
O
O
I/O
I
I/O
I/O
I/O
I/O
I
I
-
-
-
-
-
-
-
-
I/O
I
I/O
I/O
I/O
-
-
I/O
I/O
-
-
-
-
Buffer Type Description
TTL
GPIO port C bit 3
TTL
JTAG TDO and SWO
TTL
JTAG TDO and SWO
TTL
GPIO port C bit 2
TTL
JTAG TDI
TTL
GPIO port C bit 1
TTL
JTAG TMS and SWDIO
TTL
JTAG TMS and SWDIO
TTL
GPIO port C bit 0
TTL
JTAG/SWD CLK
TTL
JTAG/SWD CLK
Power Positive supply for I/O and some logic.
Power Ground reference for logic and I/O pins.
-
No connect
-
No connect
-
No connect
-
No connect
Power Ground reference for logic and I/O pins.
Power
Positive supply for most of the logic function,
including the processor core and most
peripherals.
TTL
GPIO port B bit 7
TTL
JTAG TRSTn
TTL
GPIO port B bit 6
TTL
GPIO port B bit 5
TTL
GPIO port B bit 4
Power Positive supply for I/O and some logic.
Power Ground reference for logic and I/O pins.
TTL
GPIO port D bit 4
TTL
GPIO port D bit 5
Power
The ground reference for the analog circuits
(ADC, Analog Comparators, etc.). These are
separated from GND to minimize the electrical
noise contained on VDD from affecting the
analog functions.
Power
The positive supply (3.3 V) for the analog
circuits (ADC, Analog Comparators, etc.).
These are separated from VDD to minimize
the electrical noise contained on VDD from
affecting the analog functions.
-
No connect
-
No connect
Table 17-2. Signals by Signal Name
Pin Name
ADC0
Pin Number
1
Pin Type
I
Buffer Type Description
Analog Analog-to-digital converter input 0.
November 30, 2007
423
Preliminary