LM3S2016 Datasheet, PDF (260/468 Pages) List of Unclassifed Manufacturers – Microcontroller

Analog-to-Digital Converter (ADC)
Bit/Field
6
5
4
3
2
1
0
Name
IE1
END1
D1
reserved
IE0
END0
D0
Type
R/W
R/W
R/W
RO
R/W
R/W
R/W
Reset
0
0
0
0
0
0
0
Description
2nd Sample Interrupt Enable
Same definition as IE7 but used during the second sample.
2nd Sample is End of Sequence
Same definition as END7 but used during the second sample.
2nd Sample Diff Input Select
Same definition as D7 but used during the second sample.
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
1st Sample Interrupt Enable
Same definition as IE7 but used during the first sample.
1st Sample is End of Sequence
Same definition as END7 but used during the first sample.
Since this sequencer has only one entry, this bit must be set.
1st Sample Diff Input Select
Same definition as D7 but used during the first sample.
260
November 30, 2007
Preliminary